Related papers: A current-voltage model for double Schottky barrie…
We show the operation of a Cu/Al_2O_3/Cu/n-Si hot-electron transistor for the straightforward determination of a metal/semiconductor energy barrier height even at temperatures below carrier-freeze out in the semiconductor. The hot-electron…
The metal-semiconductor contact is a major factor limiting the shrinking of transistor dimension to further increase device performance. In-plane edge contacts have the potential to achieve lower contact resistance due to stronger orbital…
We report the realization of field-effect transistors (FETs) made with chemically- synthesized layered two dimensional (2D) crystal semiconductor WS2. The 2D Schottky-barrier FETs demonstrate ambipolar behavior and a high (~105x) on/off…
We develop a theory for the current-voltage characteristics of diffusive superconductor-normal metal-superconductor Josephson junctions with resistive interfaces and the distance between the electrodes smaller than the superconducting…
In this article, we study the properties of metal contacts to single-layer molybdenum disulfide (MoS2) crystals, revealing the nature of switching mechanism in MoS2 transistors. On investigating transistor behavior as contact length…
Miniaturized or even microscale generators that could effectively and persistently converse weak and random mechanical energy from environments into electricity promise huge applications in the internet of things, sensor networks, big data,…
We have demonstrated a simple and accurate method for characterizing the capacitance of Graphene/n-Si Schottky junction solar cells (GSSCs) which embed the metal-oxide-semiconductor (MOS) capacitor. We measured two types of GSSCs, one with…
Strain provides an effective means to tune the electrical properties while retaining the native chemical composition of the material. Unlike three-dimensional solids, two-dimensional materials withstand higher levels of elastic strain…
The development of advanced electronic devices is contingent upon sustainable material development and pioneering research breakthroughs. Traditional semiconductor-based electronic technology faces constraints in material thickness scaling…
We develop a Monte Carlo model to study injection of spin-polarized electrons through a Schottky barrier from a ferromagnetic metal contact into a non-magnetic low-dimensional semiconductor structure. Both mechanisms of thermionic emission…
The metal contacts on 2D black phosphorus field-effect transistor and photodetectors are studied. The metal work functions can significantly impact the Schottky barrier at the metal-semiconductor contact in black phosphorus devices. Higher…
Internal photoemission spectroscopy was used to determine the Schottky barrier height in rectifying SrRuO3/Nb-doped SrTiO3 junctions for 0.01 wt % and 0.5 wt % Nb concentrations. Good agreement was obtained with the barrier height deduced…
Circular photocurrents (CPC), namely circular photogalvanic (CPGE) and photon drag effects, have recently been reported both in monolayer and multilayer transition metal dichalcogenide (TMD) phototransistors. However, the underlying physics…
In this paper, a transient delayed rising and fall time of $\beta$-Ga$_2$O$_3$ NMs Schottky barrier diodes (SBDs) formed on four different substrates (diamond, Si, sapphire, and polyimide) were measured using a sub-micron second resolution…
For carbon nanotube transistors, as for graphene, the electrical contacts are a key factor limiting device performance. We calculate the device characteristics as a function of nanotube diameter and metal workfunction. Although the on-state…
We present a novel resistance-compensated I-V method to extract the series resistance, ideality factor, barrier height and built-in potential of a metal-semiconductor diode. We show that a reduced equation arises from a unique but hitherto…
An analysis is made of the conditions for ohmic contacts realization in the case of Schottky contacts. Based on the classical notions about the mechanisms of current flow, we consider the generalized model of Schottky contact that takes…
A new Schottky-gate Bipolar Mode Field Effect Transistor (SBMFET) is proposed and verified by two-dimensional simulation. Unlike in the case of conventional BMFET, which uses deep diffused p+-regions as the gate, the proposed device uses…
Organic semiconductors based on small conjugated molecules generally behave as insulators when undoped, but the hetero-interfaces of two such materials can show electrical conductivity as large as in a metal. Although charge transfer is…
Ballistic electron emission microscopy (BEEM) was performed to obtain nanoscale current versus bias characteristics of non-epitaxial Au on p-type GaAs in order to accurately measure the local Schottky barrier height. Hole injection BEEM…