Related papers: Flash microwave pressing of zirconia
Graphite creep has high importance for applications using high pressures (100 MPa) and temperatures close to 2000 {\textdegree}C. In particular, the new flash spark plasma sintering process (FSPS) is highly sensitive to graphite creep when…
Sintering, as a thermal process at elevated temperature below the melting point, is widely used to bond contacting particles into engineering products such as ceramics, metals, polymers, and cemented carbides. Modelling and simulation as…
Sintering is an important processing step in both ceramics and metals processing. The microstructure resulting from this process determines many materials properties of interest. Hence the accurate prediction of the microstructure,…
The low temperature autoclave aging behavior of zirconia toughened alumina composites processed by a classical powder mixing processing route was analyzed using atomic force microscopy (AFM), scanning electron microscopy and X-Ray…
Purpose - The purpose of this paper is to describe finite element modelling for fracture and fatigue behaviour of zirconia toughened alumina microstructures. Design/methodology/approach - A two-dimensional finite element model is developed…
Ultrasonic processing of solidifying metals in additive manufacturing can provide grain refinement and advantageous mechanical properties. However, the specific physical mechanisms of microstructural refinement relevant to laser-based…
Developing nanostructured bulk ceramics is a major challenge when conventional high-temperature sintering is employed for consolidation. In the current investigation, yttria-stabilized zirconia (YSZ) with a composition of ZrO2 - 3 mol% Y2O3…
Magnetized nonneutral plasma composed of electrons or positrons couples to the local microwave environment via cyclotron radiation. The equilibrium plasma temperature depends on the microwave energy density near the cyclotron frequency.…
ZBLAN glass is a promising material for infrared optical fibers due to its wide transmission window and low theoretical attenuation. However, its strong tendency to crystallize during processing limits optical performance. While…
Atomic force microscopy (AFM) can be used to characterise several aspects of the surface degradation and reinforcement mechanisms of zirconia based ceramics, such as crack propagation, martensitic relief formation, grains pull-out and…
We have grown superconducting TiN films by atomic layer deposition with thicknesses ranging from 6 to 89 nm. This deposition method allows us to tune the resistivity and critical temperature by controlling the film thickness. The microwave…
A mathematical model is presented for the Joule heating that occurs in a ceramic powder compact during the process of flash sintering. The ceramic is assumed to have an electrical conductivity that increases with temperature, and this leads…
In printed electronics, conductive traces are often produced by printing inks of silver nanoparticles dispersed in solvents. A sintering process is usually needed to make the printed inks conductive by removing the organic dispersants and…
Synthesis of transition metal oxides by microwave irradiation is a faster and energy-saving method compared to conventional heating in an electrical furnace because microwave energy is directly converted into heat within precursors.…
Squeezed states of light have been used extensively to increase the precision of measurements, from the detection of gravitational waves to the search for dark matter. In the optical domain, high levels of vacuum noise squeezing are…
Sintering of alumina nanoparticles is of interest both from the view of fundamental research as well as for industrial applications. Atomistic simulations are tailor-made for understanding and predicting the time- and temperature-dependent…
An intense femtosecond-laser excitation of a solid induces highly nonthermal conditions. In materials like silicon, laser-induced bond-softening leads to a highly incoherent ionic motion and eventually nonthermal melting. But is this…
The mechanism of rapid and selective heating of magnetic metal oxides under the magnetic field of microwaves which continues beyond the Curie temperature $ T_{c} $ is identified by using the Heisenberg model. Monte Carlo calculations based…
Milli-Kelvin atomic force microscopy (mK-AFM) presents an ongoing experimental challenge due to the intense vibrations in a cryogen-free dilution refrigerator and the low cooling power available at mK temperatures. A viable approach is to…
Direct and hybrid microwave sintering of 3Y-ZrO 2 are comparatively studied at frequency of 2.45 GHz. Using the continuum theory of sintering, a fully coupled electromagnetic-thermalmechanical (EMTM) finite element simulation is carried out…