Related papers: A Mach-Zehnder interferometer based tuning fork mi…
We present a method of broadening the dynamic range of optical interferometric detection of cantilever displacement. The key idea of this system is to use a wavelength-tunable laser source. The wavelength is subject to proportional-integral…
Nonlinear interferometers that replace beamsplitters in Mach-Zehnder interferometers with nonlinear amplifiers for quantum-enhanced phase measurements have drawn increasing interest in recent years, but practical quantum sensors based on…
We have developed a near-field scanned microwave probe with a sampling volume of approximately 10 micron in diameter, which is the smallest one achieved in near-field microwave microscopy. This volume is defined to confine close to 100…
We present design, fabrication and characterization of a MEMS VCSEL which utilizes a silicon-on-insulator wafer for the microelectromechanical system and encapsulates the MEMS by direct InP wafer bonding, which improves the protection and…
We present a micro-mechanical terahertz (THz) detector fabricated on a silicon on insulator (SOI) substrate and operating at room-temperature. The device is based on a U-shaped cantilever of micrometric size, on top of which two aluminum…
Real-space mapping of doping concentration in semiconductor devices is of great importance for the microelectronic industry. In this work, a scanning microwave impedance microscope (MIM) is employed to resolve the local conductivity…
We present an alternative switching-magnetization magnetic force microscopy (SM- MFM) method using planar tip-on-chip probes. Unlike traditional needle-like tips, the planar probe approach integrates a microdevice near the tip apex with…
We report on the characteristics of a microwave photon counter device based on a superconducting transmon qubit. Its design is similar to [arXiv:2307.03614], with an additional bandwidth tuning circuit that allows optimizing the device…
The resonant buildup of light within optical microcavities elevates the radiation pressure which mediates coupling of optical modes to the mechanical modes of a microcavity. Above a certain threshold pump power, regenerative mechanical…
Suspended optical microresonators are promising devices for on-chip photonic applications such as radio-frequency oscillators, optical frequency combs, and sensors. Scaling up these devices demand the capability to tune the optical…
Interaction-free measurement (IFM) has been proposed as a means of high-resolution, low-damage imaging of radiation-sensitive samples, such as biomolecules and proteins. The basic setup for IFM is a Mach-Zehnder interferometer, and recent…
We describe a new type of scanning probe microscope based on a superconducting quantum interference device (SQUID) that resides on the apex of a sharp tip. The SQUID-on-tip is glued to a quartz tuning fork which allows scanning at a…
Micro-scanners have been widely used in many optical applications. The micro-scanner presented in this paper uses multimorph-type bending actuators to tilt a square plate mirror. This paper presents a complete analytical model of the…
We demonstrate chip-scale flat-top filters at near-infrared wavelengths using negative index photonic crystal based Mach Zehnder interferometers. Supported by full three-dimensional numerical simulations, we experimentally demonstrate a new…
We report the design and performance of a cryogen-free, pulse-tube refrigerator (PTR)-based scanning probe microscopy (SPM) system capable of operating at the base temperature of near 5K. We achieve this by combining a home-made interface…
Magnetic Resonance Force Microscopy (MRFM) enables three-dimensional imaging of nuclear spin densities in nanoscale objects. Based on numerical simulations, we evaluate the performance of strained SiN resonators as force sensors and show…
In this article, we present a deflection measurement setup for Atomic Force Microscopy (AFM). It is based on a quadrature phase differential interferometer: we measure the optical path difference between a laser beam reflecting above the…
Atomic Force Microscopy (AFM) allows to reconstruct the topography of surface with a resolution in the nanometer range. The exceptional resolution attainable with the AFM makes this instrument a key tool in nanoscience and technology. The…
Manipulating cold atoms in traps is a key tool for numerous realizations of quantum simulators and quantum sensors. They require accurate modeling and characterization of the underlying trapping potentials. We introduce a technique based on…
We describe magnetic field sensor based on spin wave interferometer. Its sensing element consists of a magnetic cross junction with four micro-antennas fabricated at the edges. Two of these antennas are used for spin wave excitation and two…