Related papers: Mirror Furnace for Synchrotron Dark Field X-ray Mi…
The design, calibration, and initial application of a non-contact high-temperature furnace developed for in situ synchrotron X-ray experiments are presented. The system enables a stable operation up to 1000 {\deg}C, with heating rates…
Dark field X-ray microscopy (DFXM) is an experimental technique employed to investigate material properties by probing their 'mesoscale,' or microscale structures, in a bulk-sensitive manner using hard X-rays at synchrotron radiation…
Dark Field X-ray Microscopy (DFXM) is a full-field imaging technique for non-destructive 3D mapping of orientation and strain in crystalline elements. The new DFXM beamline at ID03, developed as part of the ESRF Phase II Upgrade Project…
The combinatorial approach applied to functional oxides has enabled the production of material libraries that formally contain infinite compositions. A complete ternary diagram can be obtained by pulsed laser deposition (PLD) on 100 mm…
Dark-field X-ray microscopy (DFXM) is a nondestructive full-field imaging technique providing three dimensional mapping of microstructure and local strain fields in deeply embedded crystalline elements. This is achieved by placing an…
Dark-Field X-ray Microscopy (DFXM) is a diffraction-based synchrotron imaging techique capable of imaging defects in the bulk of extended crystalline samples. We present numerical simulations of image-formation in such a microscope using…
Dark Field X-ray Microscopy (DFXM) has advanced 3D non-destructive, high-resolution imaging of strain and orientation in crystalline materials, enabling the study of embedded structures in bulk. However, the photon-intensive nature of…
A Mythen detector has been equipped at the beamline 4B9A of Beijing Synchrotron Radiation Facility, which can be used for in-situ real-time measurement of X-ray diffraction (XRD) full profiles. In this paper, the thermal expansion behavior…
Dark-field X-ray microscopy (DFXM) is a novel X-ray imaging technique developed at synchrotrons to image along the diffracted beam with a real space resolution of ~100 nm and reciprocal space resolution of $10^{-4}$. Recent implementations…
We investigate that temperature can be measured by a modified Michelson interferometer, where at least one reflected mirror is replaced by a thermalized sample. Both of two mirrors replaced by the corresponding two thermalized samples can…
The structures, strain fields, and defect distributions in solid materials underlie the mechanical and physical properties across numerous applications. Many modern microstructural microscopy tools characterize crystal grains, domains and…
The design and implementation of a furnace for inelastic x-ray scattering from liquids with sample temperatures up to ~1600C is described. Carbon composite heaters operating in vacuum provide robust heating elements: one pair of heaters has…
In this paper, an opto-thermal analysis of a moderately heated lightweighted solar telescope mirror is carried out using 3D finite element analysis (FEA). A physically realistic heat transfer model is developed to account for the radiative…
We have developed X-ray telescope mirrors using an original electroforming replication technique established through the fabrication of millimeter-aperture, ultra-short-focal-length nanofocusing mirrors for synchrotron X-ray microscopy.…
A pump-probe dark-field X-ray microscopy (DFXM) experiment was carried out at the Advanced Photon Source (APS) with nanosecond drive laser pulses and hybrid mode X-ray probe pulses. We observe a thermal decay due to laser-induced heat…
We have developed a pulsed magnet system with panoramic access for synchrotron x-ray diffraction in magnetic fields up to 31T and at low temperature down to 1.5 K. The apparatus consists of a split-pair magnet, a liquid nitrogen bath to…
We demonstrate plasma discharges with extremely high temperature of bulk electrons at the large axially symmetric magnetic mirror device GDT (Budker Institute, Novosibirsk). According to Thomson scattering measurements, the on-axis electron…
This work presents the design, fabrication, and experimental validation of a refractive diamond axicon for X-ray beam shaping. The diamond axicon was developed to overcome the limitations of polymer-based axicons particularly for…
A cryo scanning transmission X-ray microscope, the cryo-STXM, has been designed and commissioned at the Canadian Light Source synchrotron. The instrument is designed to operate from 100 - 4000 eV (lambda = 12.4 - 0.31 nm). Users can insert…
The development of synchrotron radiation light sources has been going on for decades. Recently, X-ray free-electron lasers as well as the fourth-generation synchrotron radiation sources based on multiple bend achromat lattices are…