Related papers: Thermally activated diffusion and lattice relaxati…
Germanium (Ge), the next-in-line group-IV material, bears great potential to add functionality and performance to next-generation nanoelectronics and solid-state quantum transport based on silicon (Si) technology. Here, we investigate the…
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about…
Thin gadolinium metallic layers were deposited by high-pressure sputtering in pure Ar atmosphere. Subsequently, in situ thermal oxidation was performed at temperatures ranging from 150 to 750 $^\circ$C. At an oxidation temperature of 500…
The effects of annealing and variation of temperature on the electrical and thermoelectric properties of e-beam evaporated InSe thin films has been investigated in details. The XRD study demonstrates that the as-deposited InSe thin films…
Pump-probe experiments and polarizing microscopy are applied to examine temperature and heat flow in metallic magnetic superlattices on glass substrates. A model of heat diffusion in thin layers for cylindrical symmetry, equivalent to the…
Diminution of the thermal conductivity is a crucial aspect in thermoelectric research. We report a systematic and significant reduction of the cross-plane thermal conductivity in a model system consisting of DC sputtered TiNiSn and HfNiSn…
Thermal stability of hydrogenated amorphous Si/Ge multilayers has been investigated by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Small-Angle X-Ray Diffraction (SAXRD) techniques. Amorphous H-Si/Ge…
The thermoelectric properties of n type semiconductor, TiNiSn is optimized by partial substitution with metallic, MnNiSb in the half Heusler structure. Herein, we study the transport properties and intrinsic phase separation in the system.…
Superconducting properties of thin films can be vastly different from those of bulk materials. Seminal work has shown the critical temperature Tc of elemental superconductors decreases with decreasing film thickness when the normal-state…
While achieving high Curie temperatures (above room temperature) in diluted magnetic semiconductors remains a challenge in the case of well controlled homogeneous alloys, several systems characterized by a strongly inhomogeneous…
The significant progress of GeSn material development has enabled a feasible solution to the long-desired monolithically integrated lasers on the Si platform. While there are many reports focused on optically pumped lasers, GeSn lasers…
An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN…
We present a comprehensive computational study of the electronic, thermal, and thermoelectric (TE) properties of gallium nitride nanowires (NWs) over a wide range of thicknesses (3--9 nm), doping densities ($10^{18}$--$10^{20}$ cm$^{-3}$),…
Ternary alloys of Ge-Sb-Te (GST) have been extensively studied due to their unique ability display a reversible change in their phase upon stimulation by optical pulses i.e., amorphous (a-GST) to crystalline (c-GST) and vice-versa. The two…
Semiconductor nanostructures hold great promise for high-efficiency waste heat recovery exploiting thermoelectric energy conversion, a technological breakthrough that could significantly contribute to providing environmentally friendly…
GaN-based HEMTs have the potential to be widely used in high-power and high-frequency electronics while their maximum output powers are limited by high channel temperature induced by near-junction Joule-heating, which degrades device…
Superconducting resonators are widely used in many applications such as qubit readout for quantum computing, and kinetic inductance detectors. These resonators are susceptible to numerous loss and noise mechanisms, especially the…
This work reports a pulsed laser-assisted synthesis, detailed structural characterization, and study of plasmonic properties of three sets of TiN/TiNO thin films with high electron density. The first two sets of TiN films were grown at 600C…
A series of density functional theory (DFT) simulations was performed to investigate the approach, contact, and subsequent separation of two atomically flat surfaces consisting of different materials. Aluminum (Al) and titanium nitride…
We investigate the ultrafast dynamics of photo-induced non-thermal lattice disorder in a polycrystalline aluminium thin film to elucidate transient short- and long-range lattice distortions, their thermalization and electron-phonon coupling…