Related papers: All-fiber laser pump reflector based on a fs-writt…
Time delay signature (TDS) of a semiconductor laser subject to dispersive optical feedback from a chirped fiber Bragg grating (CFBG) is investigated experimentally and numerically. Different from mirror, CFBG provides additional…
The standard architecture for a high-peak-power femtosecond laser is chirped pulse amplification using diffraction gratings for compression; the damage threshold of the compression gratings limits current lasers to multi-petawatt peak…
A frequency-stable, broadband laser is presented for experiments on trapped ions. Since the design is based on widely available semiconductor optical amplifier technology, similar lasers can be realized for virtually any wavelength in the…
We demonstrate apodized fiber Bragg gratings inscribed with a point-by-point technique. We tailor the grating phase and coupling amplitude through precise control over the longitudinal and transverse position of each laser-inscribed…
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave…
We have developed low-dispersion (1480 l/mm), resonance-free, diffraction gratings made of dielectric materials resistant to femtosecond laser damage $(SiO_{2}/HfO_{2})$. A 14 cm diameter sample was fabricated resulting in a mean…
High-power ultra-low noise single-mode single-frequency lasers are in great demand for interferometric metrology. Robust, compact all-fiber lasers represent one of the most promising technologies to replace the current laser sources in use…
Saturable absorbers are a key component for mode-locking femtosecond lasers. Polymer films containing graphene flakes have recently been used in transmission as laser mode-lockers, but suffer from high nonsaturable loss, limiting their…
We report fabrication of THz fiber Bragg gratings (TFBG) using CO2 laser inscription on subwavelength step-index polymer fibers. A fiber Bragg grating with 48 periods features a ~4 GHz-wide stop band and ~15 dB transmission loss in the…
We demonstrate the first multimode fiber interference-based filtering in an all-fiber spatiotemporally mode-locked laser. The oscillator generates dissipative soliton pulses at 1036 nm with 12 mW average power, 6.24 ps duration and 24.3 MHz…
In this paper we describe the performance of a light detector for Ar scintillation light made of wavelength-shifting (WLS) fibers connected to Silicon-Photomultipliers (SiPM). The setup was conceived to be used as anti-Compton veto for high…
One of the prominent platforms for quantum technologies, cold atoms require reliable laser systems. We present the design, implementation, and characterization of a simple, compact, and economical laser system at 780 nm, entirely based on…
We demonstrate a novel, robust and compact fiber laser mode-locked by nonlinear polarization evolution (NPE) in polarization-maintaining (PM) fibers. The reflectivity of the artificial saturable absorber (SA) is analyzed to explain the…
Raman fiber lasers (RFLs) are currently promising and versatile light sources for a variety of applications. So far, operations of high power and brightness-enhanced RFLs have absorbed enormous interests along with rapid progress.…
Despite the wide applications for high-repetition-rate mode-locked fiber lasers, challenges persist in shortening the cavity length and coupling the fiber collimators for most existing techniques. Here, we introduce a novel collimator…
High-energy, narrow-linewidth nanosecond pulses are highly demanding for many applications that require high temporal and spatial coherence. However, the amplification of narrow-linewidth pulses is primarily limited by stimulated Brillouin…
We present a comprehensive study of dispersion managed ultrashort-pulse generation in Nd-doped polarization maintaining all-fiber laser at a 920 nm wavelength. We implement a linear laser scheme with a chirped fiber Bragg grating (CFBG)…
We report the design, nanofabrication, and characterization of high-quality polymer-based micromirror structures employing the 3D two-photon polymerization lithography technique. Compared to conventional microcavity approaches, our…
To investigate the physics of picosecond gain-switching dynamics in single-mode lasers under femtosecond optical pumping at room temperature, we designed and fabricated first-order surface-grating GaAs distributed-feedback (DFB) lasers with…
We propose and optimize theoretically a supercontinuum (SC) laser source in the mid-IR based on using As-Se-Te/As-S core/clad step-index fibers and a femtosecond all-fiber laser system at 2 {\mu}m. Numerically simulated spectra extending…