Related papers: All-fiber laser pump reflector based on a fs-writt…
The paper describes a time-resolved photoemission (TRPES) apparatus equipped with a Yb-doped fiber laser system delivering 1.2-eV pump and 5.9-eV probe pulses at the repetition rate of 95 MHz. Time and energy resolutions are 11.3 meV and…
The performance of mid-infrared erbium doped fiber lasers has dramatically improved in the last few years. In this paper we present a numerical model that provides valuable insight into the dynamics of a dual-wavelength pumped fiber laser…
Compact and efficient optical antennas are fundamental components for many applications, including high-density fiber-chip coupling and optical phased arrays. Here we present the design of grating-based micro-antennas with perfectly…
We present the first demonstration of a 1550 nm multi-wavelength distributed feedback (MW-DFB) laser employing a third-order, four-phase-shifted sampled sidewall grating. By utilizing linearly chirped sampled gratings and incorporating…
We present experimental results for a fully etched C-band grating coupler with reduced back reflection fabricated in an 800 nm silicon nitride platform. Back-reflections are reduced by symmetrically interrupting the first few grates around…
A scalable source of single photons is a key constituent of an efficient quantum photonic architecture. To realize this, it is beneficial to have an ensemble of quantum emitters that can be collectively excited with high efficiency.…
We report the first direct femtosecond laser-writing of buried channel waveguides in monocrystalline ZnS. We also report the first single-mode Cr:ZnS depressed cladding buried waveguide laser manufactured by femtosecond laser writing. The…
We report low-loss multiscan waveguides fabricated in fused silica using femtosecond laser writing technology. The multiscan principle allows to tailor the writing regime to excel at key features of any integrated photonic platform:…
In this letter, we investigate a Yb-doped mode-locked fiber oscillator that uses coherent pulse division and recombination to avoid excessive nonlinear phase shifts. The mode-locking mechanism of the laser is based on the accumulation of a…
We present a coherently-combined femtosecond fiber CPA system based on a rod-type, Ytterbium-doped, multicore fiber with 4x4 cores. A high average power of up to 500 W (after combination and compression) could be achieved at 10 MHz…
We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core Kagome Hollow-Core Photonic Crystal Fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average…
Technological advances in the fabrication of nanophotonic circuits have driven the scientific community to increasingly focus on the precise tailoring of their key optical properties, over a broadband spectral domain. In this context, the…
We demonstrate efficient diffraction of intense ultrashort laser pulses using optical-field-ionization-induced plasma-neutral gratings formed by spatially structured ionization of a neutral molecular gas in the interference field of two…
All-optical signal processing is envisioned as an approach to dramatically decrease power consumption and speed up performance of next-generation optical telecommunications networks. Nonlinear optical effects, such as four-wave mixing (FWM)…
Fiber Bragg Gratings have been advantageously used to improve the chaotic properties of semiconductor lasers. Though these components are known to be highly sensitive to environmental conditions, feedback phase fluctuations are often…
We report the first mode-locked fiber laser to operate in the femtosecond regime well beyond 3 {\mu}m. The laser uses dual-wavelength pumping and non-linear polarisation rotation to produce 3.5 {\mu}m wavelength pulses with minimum duration…
Absolute output power optimization and performance of a near- to mid-infrared picosecond optical parametric oscillator (OPO) is studied at two high pump powers using a widely-tunable output coupling (OC) technique which provides 15% to 68%…
Physical models of Ge energy band structure and material loss were implemented in LASTIP(TM), a 2D simulation tool for edge emitting laser diodes. The model calculation is able to match experimental data available. Important design…
We demonstrate a narrow line, fiber loop laser using Erbium-doped fiber as the gain material, stabilized by using a microsphere as a transmissive frequency selective element. Stable lasing with a linewidth of 170 kHz is observed, limited by…
We present a laterally emitting, coupled cavity micro fluidic dye ring laser, suitable for integration into lab-on-a-chip micro systems. The micro-fluidic laser has been successfully designed, fabricated, characterized and modelled. The…