Related papers: All-fiber laser pump reflector based on a fs-writt…
In this letter, we demonstrate the first all-fiber all-normal dispersion ytterbium-doped oscillator with nonlinear multimodal interference based saturable absorber capable to generate ultrashort dissipative soliton pulses. Additional to…
A promising solution for scalable integrated optics of trapped-ion quantum processors are curved waveguides guiding visible light within sapphire bulk material. To the best of our knowledge, no curved waveguides were investigated in…
The spectral characteristics of a fiber Bragg grating (FBG) with a transversely inhomogeneous refractive index profile, differs con- siderably from that of a transversely uniform one. Transmission spectra of inhomogeneous and asymmetric…
A new kind of mechanism of lasing is investigated experimentally. It is quite different from the traditional laser with cavity and the random laser with random scattering. In this mechanism, the intensity-dependent refractive index effect…
Fibre Bragg grating sensors have emerged as a simple, inexpensive, accurate, sensitive and reliable platform, a viable alternative to the traditional bulkier optical sensor platforms. In this work we present an extensive theoretical…
We present a coherently combined laser amplifier with 16 channels from a multicore fiber in a proof-of-principle demonstration. Filled aperture beam splitting and combination together with temporal phasing is realized in a compact and…
The gap between cell and module efficiency is a major challenge for all photovoltaic (PV) technologies. For monolithic thin film PV modules, a significant fraction of this gap has been attributed to parasitic shunts, and other defects,…
This letter describes the design and operation of a polymer-based third order distributed feed-back (DFB) microfluidic dye laser. The device relies on light-confinement in a nano-structured polymer film where an array of nanofluidic…
Generally speaking, the self-sweeping effect relies on the dynamical grating formed in a gain fiber. Here, the normal self-sweeping was generated in a pump-free ytterbium-doped fiber which serves as a fiber saturable absorber and is…
We report the amplification of an all-normal dispersion supercontinuum pulse in a Thulium / Holmium co-doped all-fiber chirped pulse amplification system. With a -20 dB bandwidth of more than 300 nm in the range 1800-2100 nm the system…
An optical parametric chirped pulse amplifier fully based on Yb lasers at 500 kHz is described. Passive optical-synchronization is achieved between a fiber laser-pumped white-light and a 515 nm pump produced with a 200 W picosecond Yb:YAG…
We report a wavelength-tunable Q-switched mode-locked fiber laser based on a compact optical tuning device, which is fabricated by coating single-layer graphene on the surface of micro-fiber Bragg grating (MFBG). Based on thermal-optical…
Design of a mid-wave IR (MWIR) broad-band fiber-based light source exploiting four-wave mixing (FWM) in a meter long suitably designed highly nonlinear (NL) chalcogenide microstructured optical fiber (MOF) is reported. This superior FWM…
Optical fibers have emerged as a transformative platform for building better and more robust solid state lasers. However, the wavelengths available to these lasers are limited. Using hollow core optical fibers allows us to add gases as new…
We demonstrate the implementation of a ring cavity to enhance the efficiency of parametric four-wave mixing in rubidium. Using an input coupler with 95% reflectance, a finesse of 19.6$\pm$0.5 is achieved with a rubidium cell inside. This…
We present a frequency-shifted feedback (FSF) laser based on a tapered amplifier. The laser operates as a coherent broadband source with up to 370GHz spectral width and 2.3us coherence time. If the FSF laser is seeded by a continuous-wave…
Moving the fiber laser emission to the region below one micron may provide a cheaper, more compact and robust alternatives to the existing solid state lasers. Here, for the first time we report a neodymium mode-locked fiber laser emitting…
In this paper we consider mid-infrared Raman lasers based on gas-filled hollow-core silica fibers and provide theoretical and experimental analysis of factors that limit the efficiency and output power of these lasers. As a result, we…
Modelocked frequency comb lasers have always operated with a single pulse circulating in the laser cavity. This meant that each laser technology had an associated limit on pulse repetition rate. Achieving higher rates required different…
We report an all-polarization-maintaining fiber optic approach to generating sub-2 cycle pulses at 2 {\mu}m and a corresponding octave-spanning optical frequency comb. Our configuration leverages mature Er:fiber laser technology at 1.5…