Related papers: Splat formation and microstructure of solution pre…
The degradation of thermal conductivity in advanced nuclear fuels due to the accumulation of fission products and irradiation-induced defects is inevitable, and must be considered as part of safety and efficiency analyses of nuclear…
A 10 wt.% nickel-steel has been developed for high pressures and low-temperature applications, due to its high strength, excellent toughness, and low ductile-to-brittle transition temperature (DBTT). Under dynamic loading conditions this…
Lithium niobate is one of the most sought-after materials for nanophotonic devices, including frequency converters, modulators, and quantum light sources. Integration of lithium niobate into optical devices, however, is hampered by…
Improvement of tool reliability and uptime is a current focus in development of extreme ultraviolet lithography. The lifetime of collection mirrors for extreme ultraviolet light in tin-based plasma light sources is limited considerably by…
Barium titanate (BaTiO3) ceramics with a different content of carbon were synthesized by spark-plasma sintering (SPS) at the temperature of 1100 C in vacuum under pressure. The concentration and distribution of carbon impurity inside the…
Superconducting strontium titanate (STO) is in the spotlight as a low carrier concentration semiconductor in proximity to polar order. Its superconducting pairing mechanism poses an open fundamental challenge, which may be resolved by…
In this work, we report on the electrochemical behavior of nitrided spaced TiO$_2$ nanotubes conformally coated with a nanocrystalline Nb$_2$O$_5$ layer and find for these hierarchical structures an excellent supercapacitor performance.…
When calcium titanate crystals are grown from stoichiometric melts, they crystallize in the cubic perovskite structure. Upon cooling to room temperature they undergo subsequent phase transitions to tetragonal and orthorhombic modifications.…
The two-dimensional electron liquid which forms between the band insulators LaAlO3 (LAO) and SrTiO3 (STO) is a promising component for oxide electronics, but the requirement of using single crystal SrTiO3 substrates for the growth limits…
This study investigates the interfacial tension, fluid mobility, and crystallization behavior of various saline and additive-modified solutions in a microfluidic chip environment, simulating pore-scale processes during CO2 injection. The…
Highly textured chalcogenide films have recently gained significant interest for phase-change memory applications. Several reports have highlighted that programming efficiency improves in devices featuring superlattice stacks, such as…
We investigate sputtering of a Ti3SiC2 compound target at temperatures ranging from RT (no applied external heating) to 970 oC as well as the influence of the sputtering power at 850 oC for the deposition of Ti3SiC2 films on Al2O3(0001)…
Thin coatings of Chromium oxide have been used for applications as absorbing material in solar cells, as protections for magnetic data recording devices and as shields in flexible solar cells. Thin coatings of pure chromium were vacuum…
High oxidation potential indicates anodes have high oxidation power and high current efficiency for organics oxidation. In this paper, we prepared Ti/Cu-SnO2 anodes using spray pyrolysis method. The Ti/Cu-SnO2 anodes have an ultra-high…
Significant research has focused on low-power stochastic devices built from memristive materials. These devices foster neuromorphic approaches to computational efficiency enhancement in merged biomimetic and CMOS architectures due to their…
Solid state synthesis and physical mechanisms of electrical conductivity variation in polycrystalline, strontium doped indium oxide In2O3:(SrO)x were investigated for materials with different doping levels at different temperatures…
Vanadium silicide (V$_3$Si) is a promising superconductor for integration with silicon-based electronics, however the interfacial growth kinetics have a strong influence on the resulting superconducting properties and are not yet fully…
Nb3Sn films were fabricated by multilayer sequential sputtering on Nb at substrate temperatures ranging from room temperature to 250 {\deg}C. The multilayers were then annealed inside a separate vacuum furnace at 950 {\deg}C for 3h. The…
This work reports on sputter depositions carried out from a compound (Ti,Zr)2AlC target, whereupon Al-containing (Ti,Zr)C thin films (30-40 nm in thickness) were deposited on MgO(111) and Al2O3(0001) substrates at temperatures ranging…
Titanium-based oxides are abundant, chemically stable, non-toxic, and highly versatile materials, with applications ranging from photovoltaics to catalysis. For rutile and anatase phases of Titanium dioxide (TiO2), the bandgap ranges from…