Related papers: Splat formation and microstructure of solution pre…
We report the low temperature growth of vertically aligned ZnO nanocolumns on Si substrates by using reactive radio frequency magnetron sputtering.High sputtering pressure combined with low substrate temperatures induce a pronounced self…
The recent discovery of excellent thermoelectric properties and topological surface states in SnTe-based compounds has attracted extensive attention in various research areas. Indium doped SnTe is of particular interest because, depending…
Thin films of ZnO:SnO2 were deposited on different substrates like glass and c-Si using spray pyrolysis method .The structures and morphology of the prepared samples films were cheeked using X-ray diffraction and atomic force microscope.…
To study the size and strain rate dependency of copper polycrystalline microstructures, a multi-layered copper/Al$_2$O$_3$ thin film was deposited on a Si substrate using a hybrid deposition system (combining physical vapour and atomic…
Chemical vapor deposition (CVD) has been established as a versatile route for the large-scale synthesis of transition metal dichalcogenides, such as tungsten disulfide (WS2). Yet, the role of the precursor composition on the efficiency of…
Condensation of water on metallic surfaces is critical for multiple energy conversion processes. Enhancement in condensation heat transfer efficiency often requires surface texturing and hydrophobicity, usually achieved through coatings, to…
Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…
We report the colloidal synthesis of 2D SnTe nanosheets through precursor hot-injection in a nonpolar solvent. During the reaction, an important intermediate - Sn-template - is formed which defines the confined growth of SnTe. This…
Single phase barium titanate-bismuth ferrite ((1-x)BaTi$_3$-(x)BiFe$_3$, BTO-BFO) solid solutions were prepared using citric acid and ethylene glycol assisted sol-gel synthesis method. Depending on the dopant content the samples are…
Applying focused ion beam (FIB) nanotomography and Rutherford backscattering spectroscopy (RBS) to dealloyed platinum-aluminum thin films an in-depth analysis of the dominating physical mechanisms of porosity formation during the dealloying…
A complex oxalate precursor, CaCu3(TiO)4(C2O4)8.9H2O, was synthesized and the precipitate that obtained was confirmed to be monophasic by the wet chemical analyses, X-ray diffraction, FTIR absorption and TG, DTA analyses. The thermal…
Being one of the strongest materials, ternary TiSiN exhibits a very interesting family of binary transition metal nitride and silicide systems. A novel technique to fabricate morphologically fascinating nano and micro structures of TiSiN is…
We have developped a novel lift-off process for fabrication of high quality superconducting submicron niobium structures. The process makes use of a thermostable polymer with a high transition temperature T_{g}= 235 C and an excellent…
We present a thermal activated solvent bonding technique for the formation of embedded microstrucutres in polymer. It is based on the temperature dependent solubility of polymer in a liquid that is not a solvent at room temperature. With…
It is investigated the formation of the phase composition and structure in the nanoscaled CoSbx (30 nm) films deposited by the method of molecular-beam epitaxy on the substrates of the oxidated monocrystalline silicon at 200 C and following…
Cu2Ta4O12 (CTaO) thin films were successfully deposited on Si(100) substrates by pulsed-laser deposition technique. The crystalline structure and the surface morphology of the CTaO thin films were strongly affected by substrate temperature,…
In this study we synthesized thin films of titanium oxide doped with thulium and/or ytterbium to modify the incident spectrum on the solar cells. This could be achieved either by photoluminescence up-converting devices, or down-converting…
Polycarbonate (PC) and protective (Ti,Al)N coatings exhibit extremely different material properties, specifically crystal structure, thermal stability, elastic and plastic behavior as well as thermal expansion coefficients. These…
We investigate the photocatalytic performance of nanocomposites prepared in a one-step process by liquid-phase exfoliation of graphite in the presence of TiO$_2$ nanoparticles (NPs) at atmospheric pressure and in water, without heating or…
A novel design has been proposed for a facile and rapid build-up of highly tailorable nanostructured multishells on metal oxide particles (graphene/TiOx@TiO2) under a dry inert atmosphere to maximize the visible-light photocatalytic…