Related papers: Splat formation and microstructure of solution pre…
A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400{\deg}C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (Epsilon-Fe2-3N, iron nitride) builds up…
We present the results of experiments on synthesis of ZnO nanoclusters by reactive pulsed laser deposition (PLD). The nanoclusters were formed and crystallized in the gas phase and deposited on SiO2 substrates. The nanostructured films were…
Ion-beam sputtering offers significant benefits in terms of deposition uniformity and pinhole-free thin-films without limiting the scalability of the process. In this work, the reactive ion-beam sputtering of nickel oxide has been developed…
We report investigation of structural phase transitions in technologically important material sodium niobate as a function of temperature on heating over 300-1075 K. Our high resolution powder neutron diffraction data show variety of…
Control over thickness, size, and area of chemical vapor deposition (CVD) grown molybdenum disulfide (MoS2) flakes is crucial for device application. Herein, we report a quantitative comparison of CVD synthesis of MoS2 on SiO2/Si substrate…
In this paper, we report the high temperature mediated structural phase transformation from B1 to B2 phase in solgel derived Cd0.2Zn0.8O nanocomposite thin film for the temperature range of 700 to 900 degree centigrade. Xray diffraction…
We present resistivity measurements of Mott insulator NiS2 single crystals after heat treatment. We find a strong increase of the low temperature resistivity that relaxes back towards the pristine behaviour over several days with a time…
When a slightly defective rutile TiO$_2$(110) surface is exposed to O$_2$ at elevated temperatures, the molecule dissociates at defects, filling O vacancies (\ov) and creating O adatoms (\oad) on {\tifc} rows. The adsorption of molecular…
We report the effects of low-temperature postannealing on the structural and superconducting properties of the recently discovered Ca-free double-layered cuprate, Sr$_2$SrCu$_2$O$_{4+y}$F$_{2-y}$. Although the as-synthesized sample prepared…
Coatings of (Al1-xVx)2O3, with x ranging from 0 to 1, were deposited by pulsed DC reactive sputter deposition on Si(100) at a temperature of 550 {\deg}C. XRD showed three different crystal structures depending on V-metal fraction in the…
We report strongly thermochromic YSZ/V0.855W0.018Sr0.127O2/SiO2 coatings, where YSZ is Y stabilized ZrO2, prepared using a scalable deposition technique on standard glass at a low substrate temperature of 320 {\deg}C and without any…
We use hexagonal mesophases made of oil-swollen surfactant-stabilized tubes arranged on a triangular lattice in water and doped with metallic salts as templates for the radiolytic synthesis of nanostructures. The nanostructures formed in…
We present a family of multi-stage preconditioners for coupled thermal-compositional-reactive reservoir simulation problems. The most common preconditioner used in industrial practice, the Constrained Pressure Residual (CPR) method, was…
By employing a mixed SnO$_2$+Sn source, we demonstrate suboxide molecular beam epitaxy growth of phase-pure single crystalline metastable SnO(001) thin films at a growth rate of ~1.0nm/min without the need for additional oxygen. These films…
We investigate the near-field heat transfer between a semi-infinite medium and a nanoparticle made of composite materials. We show that, in the effective medium approximation, the heat transfer can be greatly enhanced by considering…
Epitaxial films have the potential to be used as model systems for fundamental investigations on the martensitic transformation in binary NiTi. In this paper, we discuss growth of binary NiTi thin films on single crystalline MgO substrates.…
Pb(Zr0.52Ti0.48)O3 (PZT) thin films were in situ deposited by pulsed laser deposition (PLD) on Pt/Ti/SiO2/Si substrates using a template layer derived by sol-gel method. A 0.1-$\mu$m-thick PZT layer with (111) or (100)-preferred orientation…
The superconducting critical temperature (Tc > 15K) of niobium titanium nitride (NbTiN) thin films allows for low-loss circuits up to 1.1 THz, enabling on-chip spectroscopy and multi-pixel imaging with advanced detectors. The drive for…
In the present study, structural changes due to gradual doping of Sr in BaTiO3 were investigated by both x-ray and neutron powder diffraction techniques. Ba1-xSrxTiO3 (x=0.0, 0.5 and 1.0) samples were synthesized by PVA evaporation method…
From the laboratory to real-world applications, synthesis of two dimensional (2D) materials requires modular techniques to control morphology, structure, chemistry, and the plethora of exciting properties arising from these nanoscale…