Related papers: Study and analysis the Cu nanoparticle assisted te…
We report on the fabrication of two-dimensional periodic photonic nanostructures by nanoimprint lithography and dry etching, and their integration into a 1-{\mu}m-thin mono-crystalline silicon solar cell. Thanks to the periodic…
The integration of two-dimensional (2D) periodic nanopattern defined by nanoimprint lithography and dry etching into aluminum induced crystallization (AIC) based polycrystalline silicon (Poly-Si) thin film solar cells is investigated…
Microscale additive manufacturing of reflective copper is becoming increasingly important for microelectronics and microcomputers, due to its excellent electrical and thermal conductivity. Yet, it remains challenging for state-of-the-art…
Theoretically and experimentally we have proved the existence of optimal thickness of the porous layer used as an anti-reflection coating in solar cells. We have taken into account the joint mechanisms of generation and recombination of…
In the frame of the development of thin crystalline silicon solar cell technologies, surface nanopatterning of silicon is gaining importance. Its impact on the material quality is, however, not yet fully controlled.We investigate here the…
In this paper, we simulate a front surface inverted pyramidal grating texture on 2 to 400 micron thick silicon and optimize it to derive maximum photocurrent density from the cell. We identify a one size fits all front grating period of…
This work experimentally studies silicon-cored tungsten nanowire selective metamaterial absorber to enhance solar-thermal energy harvesting, simply fabricated by conformally coating a thin tungsten layer onto a commercial silicon nanowire…
The light absorption of [001] grown single-crystalline silicon wafers can be enhanced by chemical etching with potassium hydroxide resulting in a pyramid-like surface texture. Alongside this advantageous property in the context of solar…
Light trapping in solar cells allows for increased current and voltage, as well as reduced materials cost. It is known that in geometrical optics, a maximum 4n^2 absorption enhancement factor can be achieved by randomly texturing the…
A 2-D photonic crystal was integrated experimentally into a thin-film crystalline-silicon solar cell of 1-{\mu}m thickness, after numerical optimization maximizing light absorption in the active material. The photonic crystal boosted the…
The diffusion of substrate material into absorbing layer and oxidation of metal substrate or cermet metal nanoparticles at high temperatures are known as inevitable problems of the solar selective absorbers. In this study, we consider the…
High density and uniformity sub-100nm surface oxidized silicon nanocone forest structure is created and integrated onto the existing texturization microstructures on photovoltaic device surface by a one-step high throughput plasma enhanced…
Simulations of metal nanopatterns embedded in a thin photovoltaic absorber show significantly enhanced absorbance within the semiconductor, with a more than 300% increase for {\lambda} = 800 nm. Integrating with AM1.5 solar irradiation,…
Coating and reflecting thin films for energy harvesting purposes are interesting topics in both theoretical and experimental research. The thin film could help to enhance the absorption of the system via its specific optical properties…
Porous silicon layers (PS) have been prepared in this work via Photoelectrochemical etching process (PEC) of n type silicon wafer of 0.8 ohm.cm resistivity in hydrofluoric (HF) acid of 24.5 precent concentration at different etching times…
We study polarization independent improved light trapping in commercial thin film hydrogenated amorphous silicon (a-Si:H) solar photovoltaic cells using a three-dimensional silver array of multi-resonant nano-disk structures embedded in a…
Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model for Cu nanoparticles on three Al$_2$O$_3$ surfaces ($\gamma$-Al$_2$O$_3$(100),…
We propose a back-reflecting scheme in order to enhance the maximum achievable current in one micron thick crystalline silicon solar cells. We perform 3-dimensional numerical investigations of the scattering properties of metallic…
Recently, liquid-phase crystallization of thin silicon films has emerged as a promising candidate for thin-film photovoltaics. On 10 \mu m thin absorbers, wafer-equivalent morphologies and open-circuit voltages were reached, leading to a…
Electropolishing has found wide application as the final surface treatment of metal products in mechanical engineering and instrumentation, medicine and reflective concentrators for PV cells. It was found that electropolishing (EP) not only…