Related papers: A microrod optical-frequency reference in the ambi…
Dissipative solitons formed in Kerr microresonators may enable chip-scale frequency combs for precision optical metrology. Here we explore the creation of an octave-spanning, 15-GHz repetition-rate microcomb suitable for both f-2f…
We show that fast technical fluctuations of microwave signals can be strongly suppressed by cryogenic resonators. The experiments were carried out with sapphire resonators cooled to approximately 6 K at frequencies around 11 GHz. Each…
Lasers with long coherence time and narrow linewidth are an essential tool for quantum sensors and clocks. Ultrastable cavities and laser systems are now commercially available with fractional frequency instabilities in the mid $10^{-16}$…
An inexpensive, easily programmed microcontroller is demonstrated for the fast frequency stabilization of an infrared fiber laser. The microcontroller manages all digitalization and processing, with external circuitry only providing…
We have tuned the whispering gallery modes of a fused silica micro- resonator over nearly 1 nm at 800 nm, i.e.over half of a free spectral range or the equivalent of 10^6 linewidths of the resonator.This has been achieved by a new method…
We demonstrate low loss ridge waveguides and the first ring resonators for the mid-infrared, for wavelengths ranging from 5.4 to 5.6 {\mu}m. Structures were fabricated using electron-beam lithography on the silicon-on-sapphire material…
We present the design, fabrication and characterization of cubic (3C) silicon carbide microdisk resonators with high quality factor modes at visible and near infrared wavelengths (600 - 950 nm). Whispering gallery modes with quality factors…
We demonstrate a compact and robust device for simultaneous absolute frequency stabilization of three diode lasers whose carrier frequencies can be chosen freely relative to the reference. A rigid ULE multi-cavity block is employed, and,…
Laser phase noise remains a limiting factor in many experimental settings, including metrology, time-keeping, as well as quantum optics. Hitherto this issue was addressed at low frequencies, ranging from well below 1 Hz to maximally 100…
We stabilise a microwave oscillator at 9.6 GHz to an optical clock laser at 344 THz by using a fibre-based femtosecond laser frequency comb as a transfer oscillator. With a second frequency comb we measure independently the instability of…
We have quantified a short term instability budget for an optical frequency standard based on cold, freely expanding calcium atoms. Such systems are the subject of renewed interest due to their high frequency stability and relative…
We present measurements of silica optomechanical resonators, known as bottle resonators, passively cooled in a cryogenic environment. These devices possess a suite of properties that make them advantageous for preparation and measurement in…
We synchronize a 8.06-GHz microwave signal from a voltage-controlled oscillator with an optical pulse train from a 77.5- MHz mode-locked Er-fiber laser using a fiber-based optical-microwave phase detector. The residual phase noise between…
Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated…
Narrow-linewidth lasers with absolute frequency anchoring are essential for precision metrology, coherent sensing, and emerging quantum technologies beyond laboratory environments. Optical cavities and interferometers provide exceptional…
The intensity noise of a laser source represents one of the key factors limiting the ultimate sensitivity in laser-based systems for sensing and telecommunication. For advanced applications based on interferometry, the availability of a…
The superb precision of an atomic clock is derived from its stability. Atomic clocks based on optical (rather than microwave) frequencies are attractive because of their potential for high stability, which scales with operational frequency.…
We theoretically and experimentally investigate relevant noise processes arising in optical fiber links, which fundamentally limit their relative stability. We derive the unsuppressed delay noise for three configurations of optical links:…
Optical frequency combs, coherent light sources that connect optical frequencies with microwave oscillations, have become the enabling tool for precision spectroscopy, optical clockwork and attosecond physics over the past decades. Current…
We present the first experimental demonstration over a 43-km-long urban fiber network of a local two-way optical frequency comparison, which does not require any synchronization of the measurements. It was combined with a regular…