Related papers: A microrod optical-frequency reference in the ambi…
We report what we believe to be the lowest phase noise optical-to-microwave frequency division using fiber-based femtosecond optical frequency combs: a residual phase noise of -120dBc/Hz at 1 Hz offset from a 11.55GHz carrier frequency. We…
We describe a high-performance, compact optical frequency standard based on a microfabricated Rb vapor cell and a low-noise, external cavity diode laser operating on the Rb two-photon transition at 778 nm. The optical standard achieves an…
We demonstrate a simple, compact, and cost-effective laser noise reduction method for stabilizing an extended cavity diode laser to a 3x105 finesse mirror Fabry-P\'erot (F-P) cavity corresponding to resonance linewidth of 10 kHz using a…
The interrogation of an ultra-narrow clock transition of a single trapped ion for optical frequency metrology requires a laser stabilized to a couple of Hz per second with a linewidth of the same order of magnitude. Today, lasers in the…
Ultra-stable, quasi-monochromatic laser light forms the basis for high-precision interferometric measurements, e.g. for observing gravitational waves and for time keeping with optical clocks. Optical frequency conversion enables access to…
We determine the fundamental limit of the microresonator field uniformity. It can be achieved in a specially designed microresonator, called a bat microresonator, fabricated at the optical fiber surface. We show that the relative…
Carrier-envelope phase stabilization of optical pulses enables exquisitely precise measurements by way of direct optical-frequency synthesis, absolute optical-to-microwave phase conversion, and control of ultrafast waveforms. We report such…
Stabilized optical frequency combs (OFC) can have remarkable levels of coherence across their broad spectral bandwidth. We study the scaling of the optical noise across hundreds of nanometers of optical spectra. We measure the residual…
We experimentally demonstrate the high-sensitivity optical monitoring of a micro-mechanical resonator and its cooling by active control. Coating a low-loss mirror upon the resonator, we have built an optomechanical sensor based on a very…
Photonically integrated resonators are promising as a platform for enabling ultranarrow linewidth lasers in a compact form factor. Owing to their small size, these integrated resonators suffer from thermal noise that limits the frequency…
We estimate the laser frequency noise impact on coherent sensing using Distributed Fiber Sensing model. By stabilizing the laser in the estimated frequency zone, we demonstrate reduced noise floor over 100km using optimized probing codes
We demonstrate a thermal infrared (IR) detector based on an ultra-high-quality-factor (Q) whispering-gallery-mode (WGM) microtoroidal silica resonator, and investigate its performance to detect IR radiation at 10 micron wavelength. The…
We present a compact iodine-stabilized laser system at 633 nm, based on a distributed-feedback laser diode. Within a footprint of $27\times 15$ cm$^2$ the system provides 5 mW of frequency stabilized light from a single-mode fiber. Its…
The recent demonstration of dissipative Kerr solitons in microresonators has opened a new pathway for the generation of ultrashort pulses and low-noise frequency combs with gigahertz to terahertz repetition rates, enabling applications in…
We report on a fiber-stabilized agile laser with ultra-low frequency noise. The frequency noise power spectral density is comparable to that of an ultra-stable cavity stabilized laser at Fourier frequencies higher than 30 Hz. When it is…
Silicon photonics, compatible with large-scale silicon manufacturing, is a disruptive photonic platform that has indicated significant implications in industry and research areas (e.g., quantum, neuromorphic computing, LiDAR). Cutting-edge…
The short-term sensitivity of a kilometer-long fiber-optic gyroscope is limited mainly by thermal phase noise and relative intensity noise. Increasing the phase modulation frequency decreases the thermal phase noise but not the relative…
Stabilized optical frequency references (OFRs) are indispensable for atom-based quantum technologies, optical communications, and precision metrology. As these systems become more sophisticated, demands for compactness, robustness, and…
On-chip optical resonators have proven to be a promising platform for generating Kerr frequency combs. Whispering gallery mode resonators are particularly attractive because of their small footprint as well as low threshold and power…
We present a laser frequency stabilization system based on an iodine-filled hollow-core photonic microcell (PMC), which is a sealed version of a hollow-core photonic crystal fiber (HC-PCF). A 532 nm laser is locked to the a1 component of…