Related papers: Analysis of the detective quantum efficiency of a …
In this paper a general and unified treatment of the DQE is exposed, both in the space-domain and in the frequency-domain. The meaning of the DQE as quantum efficiency appears to be of paramount importance for a correct interpretation of…
The efficiency of a radiation detector, intended as probability of detection of an incident quantum, depends on various factors: the detected fraction of quanta ascribed to the noise-less detector, the intrinsic noise of the detector, the…
Photon-counting energy resolving detectors are subject to intense research interest, and there is a need for a general framework for performance assessment of these detectors. The commonly used linear-systems theory framework, which…
Scanning electron microscopy is a powerful tool for nanoscale imaging of organic and inorganic materials. An important metric for characterizing the limits of performance of these microscopes is the Detective Quantum Efficiency (DQE), which…
The detective quantum efficiency (DQE) and normalised noise power spectrum (NNPS) of the Timepix4 hybrid pixel detector in event-driven mode in TEM have been measured at 100 kV and 200 kV. In a raw data readout mode, the zero-frequency DQE…
Although the National Institute of Standards and Technology has measured the intrinsic quantum efficiency of Si and InGaAs APD materials to be above 98 % by building an efficient compound detector, commercially available devices have…
In this paper, the detection efficiency of a large area neutron sensitive microchannel plate detector has been evaluated. A 6LiF/ZnS detector was employed as the benchmark detector, the TOF spectra of these two detectors were simultaneously…
The conceptual design and operational principle of a novel high-efficiency, fast neutron imaging detector based on THGEM, intended for future fan-beam transmission tomography applications, is described. We report on a feasibility study…
High-resolution transmission electron microscopy (HRTEM) is an important method for imaging beam sensitive materials often under cryo conditions. Electron ptychography in the scanning transmission electron microscope (STEM) has been shown…
Photon detection efficiency is a key parameter of PMTs in high-precision neutrino and dark matter experiments, while most of these experiments are focus on quantum efficiency. More and more experiments are trying to know the detection…
Composite detectors made of stainless steel converters and multigap resistive plate chambers have been irradiated with quasi-monoenergetic neutrons with a peak energy of 175MeV. The neutron detection efficiency has been determined using two…
We propose a definition for the efficiency that can be universally applied to all classes of quantum optical detectors. This definition is based on the maximum amount of optical loss that a physically plausible device can experience while…
A solid-state quantum emitter is one of the indispensable components for optical quantum technologies. Ideally, an emitter should have a compatible wavelength for efficient coupling to other components in a quantum network. It is therefore…
Based on conventional S-20 processes, a new series of high quantum efficiency (QE) photocathodes has been developed that can be specifically tuned for use in the ultraviolet, blue or green regions of the spectrum. The QE values exceed 30%…
We present a model for the Global Quantum Efficiency (GQE) of the MicroBooNE optical units. An optical unit consists of a flat, circular acrylic plate, coated with tetraphenyl butadiene (TPB), positioned near the photocathode of a 20.2-cm…
We analyze the performance of photon-number-resolving (PNR) detectors and introduce a figure of merit for the accuracy of such detectors. This figure of merit is the (worst-case) probability that the photon-number-resolving detector…
Motivated by recent interest in implementing circuit quantum electrodynamics with semiconducting quantum dots, we consider a double quantum dot (DQD) capacitively coupled to a superconducting resonator that is driven by the microwave field…
A neutron imaging detector based on neutron-sensitive microchannel plates (MCPs) was constructed and tested at beamlines of thermal and cold neutrons. The MCPs are made of a glass mixture containing B-10 and natural Gd, which makes the bulk…
We measure the quantum efficiency (QE) of individual dibenzoterrylene (DBT) molecules embedded in para-dichlorobenzene at cryogenic temperatures. To achieve this, we apply two distinct methods based on the maximal photon emission and on the…
Spectroscopic x-ray detectors (SXDs) are poised to play a substantial role in the next generation of medical x-ray imaging. Evaluating their performance in terms of the detective quantum efficiency (DQE) requires normalization of the…