Related papers: Breaking molecular nitrogen under mild conditions …
We report the reduction in residual stress of AlN thin films and also the crystal structure, surface morphology and nanomechanical properties of magnetron sputtered as a function of substrate temperature (Ts, 35 - 600 ?C). The residual…
In their rocksalt structure, rare-earth monosulfides offer a more stable alternative to alkali metals to attain low or negative electron affinity when deposited on various III-V and II-VI semiconductor surfaces. In this article, we first…
We fabricated NiFe$_\textrm{2}$O$_\textrm{x}$ thin films on MgAl$_2$O$_4$(001) substrates by reactive dc magnetron co-sputtering varying the oxygen partial pressure during deposition. The fabrication of a variable material with oxygen…
Laser nitriding represents a versatile approach for tailoring the surface properties of metals. Up to now, its effect on the superconducting response of niobium nitrides remains largely unexplored. In this work, the nitriding process of…
Niobium nitride (NbN) is a useful material for fabricating detectors because of its high critical temperature and relatively high kinetic inductance. In particular, NbN can be used to fabricate nanowire detectors and mm-wave transmission…
Cobalt nitride (Co-N) thin films prepared using a reactive magnetron sputtering process by varying the relative nitrogen gas flow (\pn) are studied in this work. As \pn~increases, Co(N), \tcn, Co$_3$N and CoN phases are formed. An…
Heteroepitaxial growth of selected group IV-VI nitrides on various orientations of sapphire (\alpha-Al2O3) is demonstrated using atomic layer deposition. High quality, epitaxial films are produced at significantly lower temperatures than…
Bulk NdNiO3 exhibits a metal-to-insulator transition (MIT) as the temperature is lowered that is also seen in tensile strained films. In contrast, films that are under a large compressive strain typically remain metallic at all…
Transition-metal nitrides in {\eta}-carbide type structures exhibit unusual bonding motifs and proximity to magnetic instabilities. Yet they remain unexplored in thin-film form due to the difficulty of stabilizing nitrogen-poor ternaries…
Low resistivity (~3-24 mOhm.cm) with tunable n- and p-type phase pure Cu2O thin films have been grown by pulsed laser deposition at 25-200 0C by varying the background oxygen partial pressure (O2pp). Capacitance data obtained by…
The niobium oxide polymorph T-Nb2O5 has been extensively investigated in its bulk form especially for applications in fast-charging batteries and electrochemical (pseudo)capacitors. Its crystal structure that has two-dimensional (2D) layers…
Two single crystal phases of tantalum nitride were stabilized on c-plane sapphire using molecular beam epitaxy. The phases were identified to be $\delta$-TaN with a rocksalt cubic structure and $\gamma$-Ta$_2$N with a hexagonal structure.…
Atomically flat, epitaxial, and stoichiometric thin films of the electronically phase separated compound (La$_{0.5}$Pr$_{0.5}$)$_{0.67}$Ca$_{0.33}$MnO$_{3}$ were grown on as-received and treated NdGaO$_{3}$ substrates by fine tuning of…
We investigate thin film resistive thermometry based on metal-to-insulator-transition (niobium nitride) materials down to very low temperature. The variation of the NbN thermometer resistance have been calibrated versus temperature and…
Superconducting thin films of MgB2 were deposited by Pulsed Laser Deposition on magnesium oxide and sapphire substrates. Samples grown at 450C in an argon buffer pressure of about 10-2 mbar by using a magnesium enriched target resulted to…
The structural and electrical properties of Ti-N films deposited by reactive sputtering depend on their growth parameters, in particular the Ar:N2 gas ratio. We show that the nitrogen percentage changes the crystallographic phase of the…
We have carried out a detailed programme to explore the superconducting characteristics of reactive DC-magnetron sputtered NbN. The basic principle is to ignite a plasma using argon, and then to introduce a small additional nitrogen flow to…
We have carried out a detailed programme to explore the superconducting characteristics of reactive DC-magnetron sputtered NbN. The basic principle is to ignite a plasma using argon, and then to introduce a small additional nitrogen flow to…
Soft ferromagnetic NiFe thin films are promising for applications in spintronic devices because of their constituent electrical and magnetic properties. Electron beam evaporation and sputtering techniques have been used to deposit NiFe thin…
Herein, titania thin films are fabricated by a facile liquid-phase method based on vacuum filtration of a colloidal suspension of titania nanosheets, which is followed by thermal annealing to transform the nanosheet film into anatase TiO2.…