Related papers: Tailoring Interdigitated Back Contacts for High-pe…
In spite of having higher carrier mobilities and absorption coefficients of germanium (Ge) than those of silicon (Si), there has been less focus on Ge-based solar cells due to the low bandgap and high-cost of Ge wafer as well as requirement…
Thermophotovotaics convert thermal radiation from local heat sources to electricity. A new breakthrough in creating highly efficient thin-film solar cells can potentially enable thermophotovoltaic systems with unprecedented high efficiency.…
Heterostructures based on atomically thin semiconductors are considered a promising emerging technology for the realization of ultrathin and ultralight photovoltaic solar cells on flexible substrates. Much progress has been made in recent…
The prospect of additional energy yield and improved reliability have increased commercial interest in bifacial solar modules. A number of recent publications have quantified the bifacial gain for several configurations. For example, a…
We simulated photovoltaic characteristics of single heterojunction solar cell with Cu2ZnSnS4 and Cu2ZnSnSe4 absorber layer numerically using one dimensional solar cell capacitance simulator (SCAPS-1D). n-CdS/ZnO double buffer layer is used…
Agrivoltaics is an innovative approach in which solar photovoltaic (PV) energy generation is collocated with agricultural production to enable food-energy-water synergies and landscape ecological conservation. This dual-use requirement…
CdTe-based thin film solar cell has been modeled and enumerated with a thin CuInTe2 (CIT) current booster layer. CdTe-based n-CdS/p-CdTe/p+-CIT/p++-WSe2 heterojunction device has been evaluated for the highest performance. It is revealed…
In this article, we theoretically demonstrate multilevel impurity photovoltaic effect in an efficient silicon dual-homojunction solar cell that ensures an extended absorption of longer wavelength light. Along with suitable contact work…
Indoor photovoltaics (IPVs) have attracted increasing attention for sustainably powering Internet of Things (IoT) electronics. Sb$_2$S$_3$ is a promising IPV candidate material with a bandgap of ~1.75 eV, which is near the optimal value for…
A coupled optoelectronic model was implemented along with the differential evolution algorithm to assess the efficacy of grading the bandgap of the CZTSSe layer for enhancing the power conversion efficiency of thin-film CZTSSe solar cells.…
This study introduces and investigates the integration of a cell-free architecture with bistatic backscatter communication (BiBC), referred to as cell-free BiBC or distributed access point (AP)-assisted BiBC, which can enable potential…
Intermediate Band Solar Cell is an advanced concept for solar energy conversion in which two low-energy photons can promote an electron to the conduction band through a so-called intermediate band. To limit recombination and preserve the…
With the practical efficiency of the silicon photovoltaic (PV) cell approaching its theoretical limit, pushing conversion efficiencies even higher now relies on reducing every type of power loss that can occur within the device. Limiting…
Flexible Cu2ZnSn(S, Se)4 (CZTSSe) solar cells take the advantages of environmental friendliness, low cost, and multi-scenario applications, and have drawn extensive attention in recent years. Compared with rigid devices, the lack of alkali…
Non-radiative recombination processes are the biggest hindrance to approaching the radiative limit of the open-circuit voltage for wide-band gap perovskite solar cells. In addition, to high bulk quality, good interfaces and good energy…
Among various types of perovskite-based tandem solar cells (TSCs), all-perovskite TSCs are of particular attractiveness for building- and vehicle-integrated photovoltaics, or space energy areas as they can be fabricated on flexible and…
Photovoltaic materials are recognized for their potential as sustainable energy sources that enable the conversion between light and electrical energy. However, solar cells have been unable to surpass the theoretical limit of 32%, known as…
Thermophotovoltaic (TPV) converters are capable of generating electrical energy from infrared radiation emitted by an emitter powered by waste heat or solar energy. Key performance metrics for TPV converters are power output density (POD),…
While silicon solar cells dominate global photovoltaic energy production, their continued improvement is hindered by the single junction limit. One potential solution is to use molecular singlet exciton fission to generate two electrons…
The intermediate band solar cell (IBSC) and quantum ratchet solar cell (QRSC) have the potential to surpass the efficiency of standard single-junction solar cells by allowing sub-gap photon absorption through states deep inside the band…