Related papers: High linear low noise amplifier based on self-bias…
Low latency models are critical for real-time speech enhancement applications, such as hearing aids and hearables. However, the sub-millisecond latency space for resource-constrained hearables remains underexplored. We demonstrate speech…
We present a SNAIL-based parametric amplifier that integrates a lumped-element impedance matching network for increased bandwidth and an on-chip pump-port filter for efficient pump delivery. The amplifier is fabricated using a single-layer…
A new cryogenic noise calibration source for radio astronomy receivers is presented. Dissipated power is only 4.2 mW, allowing it to be integrated with the cold part of the receiver. Measured long-term stability, sensitivity to bias…
In Broadband Stimulated Raman Spectroscopy, the intrinsic limit given by the laser shot noise is seldom reached due to the electronic noise of the front-end amplifier and the intensity fluctuations of the laser source. In this paper we…
A room-temperature mid-infrared (9 um) heterodyne system based on high-performance unipolar optoelectronic devices is presented. The local oscillator (LO) is a quantum cascade laser, while the receiver is an antenna coupled quantum well…
The interest in MoS2 for radio-frequency (RF) application has recently increased. However, little is known on the scaling behavior of transistors made from MoS2 for RF applications, which is important for establishing performance limits for…
High Q-factor inductors are critical in designing high performance RF/microwave circuits on SOI technology. Substrate losses is a key limiting factor when designing inductors with high Q-factors. In this context, we report a substrate…
This paper investigates the transceiver design problem in a noisy-sensing noisy-transmission multi-input multi-output (MIMO) wireless sensor network. Consider a cluster-based network, where multiple sensors scattering across several…
Present semiconductor research is increasingly focusing on either higher speeds or higher linearity or both. Applications range from consumer, industrial, healthcare and military. Typically such circuits are fabricated in today's…
The design and performance of a sensitive and reliable cross-correlation spectrum analyzer for studying low frequency transport noise is described in detail. The design makes use of common PC-based data acquisition hardware and…
The quest to enhance the sensitivity of electron spin resonance (ESR) is an ongoing challenge. One potential strategy involves increasing the frequency, for instance, moving from Q-band (approximately 35 GHz) to W-band (approximately 94…
Single-channel speech enhancement algorithms are often used in resource-constrained embedded devices, where low latency and low complexity designs gain more importance. In recent years, researchers have proposed a wide variety of novel…
Integrating audio comprehension and generation into large language models (LLMs) remains challenging due to the continuous nature of audio and the resulting high sampling rates. Here, we introduce a novel approach that combines Variational…
In the past few years, advancements in the field of nano circuit design has become tougher than the demand. Low power devices have emerged tremendously.Both voltage mode aswell as current mode devices have proven alternative to each other…
In present work a new XNOR gate using three transistors has been presented, which shows power dissipation of 550.7272$\mu$W in 0.35$\mu$m technology with supply voltage of 3.3V. Minimum level for high output of 2.05V and maximum level for…
Large-scale multi-user multiple-input multiple-output (MU-MIMO) systems and cloud radio access networks (C-RANs) are considered promising technologies for the fifth generation (5G) of wireless networks. In these technologies, the use of…
In this work, a 38.7 GHz acoustic wave ladder filter exhibiting insertion loss (IL) of 5.63 dB and 3-dB fractional bandwidth (FBW) of 17.6% is demonstrated, pushing the frequency limits of thin-film piezoelectric acoustic filter technology.…
This paper presents a low-loss optically-controlled inline RF switch suitable for L- and S-band applications. Under 1.5 W laser power, the switch exhibits a measured ON-state insertion loss of less than 0.33 dB and return loss better than…
This paper introduces a robust Pareto design approach for transistor sizing of Gallium Nitride (GaN) High Electron Mobility Transistors (HEMTs), particularly for power amplifier (PA) and low-noise amplifier (LNA) designs in 5G applications.…
In a normal indoor environment, Raman spectrum encounters noise often conceal spectrum peak, leading to difficulty in spectrum interpretation. This paper proposes deep learning (DL) based noise reduction technique for Raman spectroscopy.…