Related papers: Immunity to Scaling in MoS2 Transistors Using Edge…
Two-dimensional (2D) materials have great potential for use in future electronics due to their atomically thin nature which withstands short channel effects and thus enables better scalability. Device scaling is the process of reducing all…
Understanding the interfacial electrical properties between metallic electrodes and low dimensional semiconductors is essential for both fundamental science and practical applications. Here we report the observation of thickness reduction…
In this article, we investigate electrical transport properties in ultrathin body (UTB) MoS2 two-dimensional (2D) crystals with channel lengths ranging from 2 {\mu}m down to 50 nm. We compare the short channel behavior of sets of MOSFETs…
The scaling of transistors to sub-10 nm dimensions is strongly limited by their contact resistance (Rc). Here we present a systematic study of scaling MoS2 devices and contacts with varying electrode metals and controlled deposition…
We study the channel width scaling of back-gated MoS2 metal-oxide-semiconductor field-effect transistors (MOSFETs) from 2 {\mu}m down to 60 nm. We reveal that the channel conductance scales linearly with channel width, indicating no evident…
The performance and scalability of two-dimensional (2D) field-effect transistors (FETs) are strongly influenced by geometry-defined electrostatics. In most 2D FET studies, the gate overlaps with the source and drain electrodes, allowing the…
Two-dimensional (2D) semiconductors are promising candidates for scaled transistors because they are immune to mobility degradation at the monolayer limit. However, sub-10 nm scaling of 2D semiconductors, such as MoS2, is limited by the…
The interest in MoS2 for radio-frequency (RF) application has recently increased. However, little is known on the scaling behavior of transistors made from MoS2 for RF applications, which is important for establishing performance limits for…
We report a new strategy for fabricating 2D/2D low-resistance ohmic contacts for a variety of transition metal dichalcogenides (TMDs) using van der Waals assembly of substitutionally doped TMDs as drain/source contacts and TMDs with no…
Two-dimensional molybdenum disulfide (MoS2) is an excellent channel material for ultra-thin field effect transistors. However, high contact resistance across the metal-MoS2 interface continues to limit its widespread realization. Here,…
Ultrathin two-dimensional semiconductors obtained from layered transition-metal dichalcogenides such as molybdenum disulfide (MoS2) are promising for ultimately scaled transistors beyond Si. Although the shortening of the semiconductor…
Making ultra-short gate-length transistors significantly contributes to scaling the contacted gate pitch. This, in turn, plays a vital role in achieving smaller standard logic cells for enhanced logic density scaling. As we push the…
As silicon transistors scale toward future technology nodes, three-dimensional architectures -- including gate-all-around (GAA) nanoribbon and complementary field-effect transistors (CFETs) -- require channel widths in the tens of…
Semiconducting MoTe2 is one of the few two-dimensional (2D) materials with a moderate band gap, similar to silicon. However, this material remains under-explored for 2D electronics due to ambient instability and predominantly p-type Fermi…
The application of two-dimensional (2D) semiconductors, such as monolayer MoS2, is limited by the high contact resistance commonly attributed to interfacial barriers at metal contacts. Furthermore, the dependence of electrical conductivity…
Strain engineering has played a key role in modern silicon electronics, having been introduced as a mobility booster in the 1990s and commercialized in the early 2000s. Achieving similar advances with two-dimensional (2D) semiconductors in…
Layered two-dimensional (2D) semiconducting transition metal dichalcogenides (TMD) have been widely isolated, synthesized, and characterized recently. Numerous 2D materials are identified as the potential candidates as channel materials for…
In ultra-thin two-dimensional (2-D) materials, the formation of ohmic contacts with top metallic layers is a challenging task that involves different processes than in bulk-like structures. Besides the Schottky barrier height, the transfer…
The high contact resistance between MoS$_2$ and metals hinders its potential as an ideal solution for overcoming the short channel effect in silicon-based FETs at sub-3nm scales. We theoretically designed a MoS$_2$-based transistor,…
Monolayer Molybdenum Disulfide (MoS2) with a direct band gap of 1.8 eV is a promising two-dimensional material with a potential to surpass graphene in next generation nanoelectronic applications. In this letter, we synthesize monolayer MoS2…