Related papers: XPS studies of nitrogen doping niobium used for ac…
Titanium and niobium are the main materials used for the fabrication of Superconducting Radio Frequency (SRF) cavities. These two metals are usually joined , using various welding techniques, using a third material in between. This…
The surface composition of polycrystalline niobium-doped strontium titanate (SrTiO3 : Nb) is studied using X-ray photoelectron emission microscopy (XPEEM) for many grain orientations in order to characterise the surface chemistry with high…
Medium temperature (mid-T) baking, typically conducted at 300 350 C, enhances the quality factor of niobium (Nb) superconducting radio frequency cavities. High vacuum furnace baking is commonly preferred for its practicality in large-scale…
We report on the first demonstration of p-type doping in large area few-layer films of (0001)-oriented chemical vapor deposited (CVD) MoS2. Niobium was found to act as an efficient acceptor up to relatively high density in MoS2 films. For a…
Experimental data on N-doped superconducting (sc) cavities are further analyzed which contribute to confirm a recently proposed model explaining the increase of the Q-value versus the accelerating gradient.
Buffered Chemical Polishing (BCP) was the most conventional polishing method for superconducting radio frequency (SRF) Niobium (Nb) cavity surface preparation before the discovery of Electropolishing (EP), which is superior to BCP in high…
TiFe alloys are attractive compounds for solid-state stationary hydrogen storage. They can absorb hydrogen gas reversibly at near ambient temperatures and practical pressures with high volumetric capacities surpassing that of cryogenically…
The recent discovery of superconductivity in Nd$_{1-x}$Sr$_{x}$NiO$_2$ has drawn significant attention in the field. A key open question regards the evolution of the electronic structure with respect to hole doping. Here, we exploit x-ray…
The field distribution inside the superconducting radiofrequency (SRF) film with different mean free path is studied using niobium (Nb) as an example. The surface resistance of clean Nb film with different substrate and different film…
In this study, the effect of Sr- and Ni-doping on microstructural, morphological and sensing properties of ZnO nanorods has been investigated. Nanorods with different Sr and Ni loadings were prepared using a simple wet chemical method and…
One of many challenges for niobium (Nb) based superconducting devices is the improvement over the surface morphology and superconducting properties as well as the reduction of defects. We employed a novel deposition technique, i.e. biased…
This paper reports on a surface impedance measurement of a niobium titanium superconducting radio frequency (SRF) cavity in a magnetic field (up to $10\,{\rm T}$). A novel method is employed to decompose the surface resistance contributions…
Nb3Sn (Tc ~ 18 K and Hsh ~ 400 mT) is a prospective material to replace Nb (Tc ~ 9 K and Hsh ~ 200 mT) in SRF accelerator cavities for significant cost reduction and performance enhancement. Because of its material properties, Nb3Sn is best…
Niobium superconducting radio-frequency (SRF) cavities for high energy accelerator applications have been greatly improved in terms of the quality factor $Q$ by techniques such as Nitrogen doping. However, the mechanisms leading improvement…
The thermal conductivity, DC magnetization and penetration depth of large-grain niobium hollow cylindrical rods fabricated from ingots, manufactured by CBMM subjected to chemical and heat treatment were measured. The results confirm the…
Vacuum thermal treatments (baking) are known to improve the superconducting properties of the RF surface layer of niobium cavities, and are employed as a last processing step to increase their efficiency determined by intrinsic quality…
Large-grain Nb has become a viable alternative to fine-grain Nb for the fabrication of superconducting radio-frequency cavities. In this contribution we report the results from a heat treatment study of a large-grain 1.5 GHz single-cell…
Cubic boron nitride (cBN) is an ultra-wide bandgap, super-hard material with potential for extreme-temperature and -pressure applications. A proof-of-principle p-n junction using cBN was demonstrated almost three decades ago. However, to…
We present observations of the North Polar Spur (NPS) using the X-ray Imaging Spectrometer (XIS) aboard the Suzaku X-ray satellite. The NPS is a large region of enhanced soft X-ray and radio emission projected above the plane of the Galaxy,…
This Snowmass21 Contributed Paper encourages the Particle Physics community in fostering R&D in Superconducting Nb3Sn coated Copper RF Cavities instead of costly bulk Niobium. It describes the pressing need to devote effort in this…