Related papers: XPS studies of nitrogen doping niobium used for ac…
Crystalline Si substrates are doped by laser annealing of solution processed Si. For this experiment, dispersions of highly B-doped Si nanoparticles (NPs) are deposited onto intrinsic Si and laser processed using an 807.5nm cw-laser. During…
Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, quasiparticle spectroscopy, and…
Identifying the loss mechanisms of niobium cavities enables an accurate determination of applications for future accelerator projects and points to research topics required to mitigate current limitations. For several cavities an increasing…
Ab-initio calculations have been performed to study the geometry and electronic structure of boron (B) and nitrogen (N) doped graphene sheet. The effect of doping has been investigated by varying the concentrations of dopants from 2 % (one…
Samples were examined using a superconducting (Nb) neutron imaging system employing a delay-line technique which in previous studies was shown to have high spatial resolution. We found excellent correspondence between neutron transmission…
A significant advance toward achieving practical applications of graphene as a two-dimensional material in nanoelectronics would be provided by successful synthesis of both n-type and p-type doped graphene. However reliable doping and a…
The doping of lighter non-metals like boron and nitrogen into graphene represents a promising advancement in the field of nano-electronic devices, particularly in the development of field-effect transistors (FETs). These doped…
Materials imperfections in Nniobium based superconducting quantum circuits, in particular, two-level-system (TLS) defects, are a major source of decoherence, ultimately limiting the performance of quantum computation and sensing. Thus,…
The research note presents results of coupled RF and thermal simulation of a cryocooler conduction cooled 650 MHz SRF cavity made of bulk niobium and coated with Nb3Sn on the RF surface. The cavity is part of a particle accelerator design…
Microwave spectroscopy is a powerful experimental tool to reveal information on the intrinsic properties of superconductors. Superconducting stripline resonators, where the material under study constitutes one of the ground planes, offer a…
A DC cylindrical magnetron sputtering system has been commissioned and operated to deposit Nb3Sn onto 2.6 GHz Nb SRF cavities. After optimizing the deposition conditions in a mock-up cavity, Nb-Sn films are deposited first on flat samples…
We propose cost-effective production of medium grain (MG) niobium (Nb) discs directly sliced from forged and annealed billet. This production method provides clean surface conditions and reliable mechanical characteristics with…
Niobium with its highest transition temperature among all elemental superconductors has become a favorable substrate for realizing well-defined low-dimensional magnet-superconductor hybrid systems exhibiting novel types of exotic electronic…
We focused on elastic properties of B- and N-doped graphene in wide range of concentrations up to 20%. The Young's, bulk and shear moduli and Poisson's ratio have been calculated by means of the density functional theory for a…
Nanoscale defect structure within the magnetic penetration depth of ~100nm is key to the performance limitations of niobium superconducting radio frequency (SRF) cavities. Using a unique combination of advanced thermometry during cavity RF…
Fully energy-filtered X-ray photoelectron emission microscopy is used to analyze the spatial distribution of the silicon sub-oxide structure at the SiO2/Si interface as a function of underlying doping pattern. Using a spectroscopic…
Nb$_3$Sn is a promising advanced material under development for superconducting radiofrequency (SRF) cavities. Past efforts have been focused primarily on small development-scale cavities, but large, often multi-celled cavities, are needed…
Workbench-size particle accelerators, enabled by Nb3Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons…
We have carried out a detailed programme to explore the superconducting characteristics of reactive DC-magnetron sputtered NbN. The basic principle is to ignite a plasma using argon, and then to introduce a small additional nitrogen flow to…
We have carried out a detailed programme to explore the superconducting characteristics of reactive DC-magnetron sputtered NbN. The basic principle is to ignite a plasma using argon, and then to introduce a small additional nitrogen flow to…