Related papers: Work of a multi-cathode counter in a single electr…
In this paper, we investigate the single photon response from the reflection of the Microwave Kinetic Inductance Detector (MKID) array. Reflection measurements are carried out using two configurations: one is measured simultaneously with…
New upper limit on a mixing parameter for hidden photons with a mass from 5 eV till 10 keV has been obtained from the results of measurements during 78 days in two configurations R1 and R2 of a multicathode counter. For a region of a…
A photon-counting silicon strip detector with two energy thresholds was investigated for spectral X-ray imaging in a mammography system. Preliminary studies already indicate clinical benefit of the detector, and the purpose of the present…
A novel instrument has been developed to monitor and record the ambient pa- rameters such as temperature, atmospheric pressure and relative humidity. These parameters are very essential for understanding the characteristics such as gain of…
Models for characterization of laser-accelerated electron via its produced bremsstrahlung are provided for both thin and thick targets. An effective temperature functional is proposed to overcome the so-called cold and hot "temperatures" in…
The LPMWPC can be used as the {\Delta}E detector for the low-energy charged particle detection. In order to increase the transmittance, the wires were adopted as the cathode. This work investigated the LPMWPC signal characteristics of this…
A MicroCAT (Micro Compteur A Trous) structure which is used for avalanche charge multiplication in gas filled radiation detectors has been optimised with respect to maximum electron transparency and minimum ion feedback. We report on the…
Basic R & D have been carried out with one small straw tube detector prototype with premixed gas of Ar+CO2 in 70:30 and 90:10 ratio. The gain and the energy resolution are measured with Fe55 X-ray source. Effect of temperature and pressure…
Electron counting experiments attempt to provide a current of a known number of electrons per unit time. We propose architectures utilizing a few readily available electron-pumps or turnstiles with the typical error rates of 100 ppm with…
Two factors contribute to the electrical capacitance between two electrodes: a classical contribution, stemming from the electric field, and a quantum contribution, governed by the Pauli exclusion principle, which increases the difficulty…
A gas electron multiplier (GEM) detector with a gadolinium cathode has been developed to explore its potential application as a neutron detector. It consists of three standard-sized ($10\times 10$ cm${}^{2}$) GEM foils and a thin gadolinium…
The inelastic scattering of electrons is one route to study the vibrational and electronic properties of materials. Such experiments, also called electron energy-loss spectroscopy, are particularly useful for the investigation of the…
We report a comparative ab-initio study of different types of adsorbates and their adsorption mechanism on the field-emission performance of single-walled carbon nanotubes by analyzing electrical properties and transport characteristics and…
A device for measuring radioactive impurities in gas is developed, consisting of an electrostatic collection type radon detector and an extremely low radioactivity proportional counter. This device measures the radioactive impurities…
This thesis is organized as follows: Chapter 1 introduces the background, motivation, objectives, and contributions of this thesis. Chapter 2 presents a review of existing online impedance extraction approaches. Chapter 3 proposes the…
Electroluminescence and electron avalanching are the physical effects used in two-phase argon and xenon detectors for dark mater search and neutrino detection, to amplify the primary ionization signal directly in cryogenic noble-gas media.…
Single-photon detectors are widely used in modern quantum optics experiments and applications. Like all detectors, it is important for these devices to be accurately calibrated. A single-photon detector is calibrated by determining its…
Electron counting experiments attempt to provide a current of a known number of electrons per unit time. We propose architectures utilizing a few readily available electron-pumps or turnstiles with modest error rates of 1 part per $10^4$…
We introduce a new output amplifier for fully-depleted thick p-channel CCDs based on double-gate MOSFETs. The charge amplifier is an n-type MOSFET specifically designed and operated to couple the fully-depleted CCD with high charge-transfer…
Neutrino detectors are among the largest photon detection instruments, built to capture scarce photons upon energy deposition. Many discoveries in neutrino physics, including the neutrino itself, are inseparable from the advances in photon…