Related papers: Selective etching of PDMS: etching as a negative t…
$\beta$-Ga$_{2}$O$_{3}$ nanomembranes, obtained by ion-beam-assisted exfoliation, are used in the fabrication of simple metal-semiconductor-metal (MSM) structures, that are tested as photodetectors (PD) and field-effect transistors (FET).…
Symmetry-protected resonances can be made to couple with free space by introducing a small degree of geometric asymmetry, leading to controllably-sharp spectral response. Here, we experimentally demonstrate a broken-symmetry metasurface for…
Radiation and hydrolytic resistance of Eu0.054Gd0.014Y0.05La0.111Ce0.2515Pr0.094Nd0.3665Sm0.059PO4 with monazite structure has been studied. The powders were obtained by deposition from solutions. Ceramic specimens with relative density…
3D printing technology offers the possibility of producing synthetic samples with accurately defined microstructures. As indicated by effective medium theory (EMT), the shapes, orientations, and sizes of voids significantly affect the…
The modification of the wetting properties of marble surfaces upon multi-scale texturing induced by ultrafast laser processing (340 fs pulse duration, 1030 nm wavelength) has been investigated with the aim of evaluating its potential for…
This paper describes the development of metallic bipolar plate fabrication using micro-electroforming process for mini-DMFC (direct methanol fuel cell) stacks. Ultraviolet (UV) lithography was used to define micro-fluidic channels using a…
The paper reports on the comparison of the wetting properties of super-hydrophobic silicon nanowires (NWs), using drop impact impalement and electrowetting (EW) experiments. A correlation between the resistance to impalement on both EW and…
This study presents a prototype D-band waveguide orthomode transducer (OMT) fabricated using chemically etched brass platelets. This method offers a fast, cost-effective, and scalable approach for producing waveguide OMTs above 100 GHz,…
Silicon nanowires are prepared by the method of the two-step metal-assisted wet chemical etching. We have analyzed the structure of solid, rough and porous nanowire surfaces of boron-doped silicon substrates with resistivities of \rho >…
The corrosion resistance of an electroplated (EP) Zn coating whose surface was chemically etched to produce surface defects (pores) is investigated in this work. Impedance and DC polarisation measururements were employed to study the…
We develop an approach to use nanostructured plasmonic materials as a non-magnetic negative-refractive index system at optical and near-infrared frequencies. In contrast to conventional negative refraction materials, our design does not…
Metasurfaces are subwavelength-thick constructs, consisting of discrete meta-atoms, providing discretized levels of phase accumulation that collectively approximate a designed optical functionality. The meta-atoms utilizing geometric phase…
Realization of the anomalous refraction effects predicted by Huygens' metasurfaces (HMS) have required tedious and time-consuming trial-and-error numerical full-wave computations. It is shown herein that these requirements can be alleviated…
We provide direct evidence of the effects of interface engineering of various substrates by Microbubble lithography (MBL). We choose a model organic plastic (or polymer) poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS),…
In this work, 6 to 12 nm iron oxide nanoparticles were synthesized and coated with poly(acrylic acid) chains of molecular weight 2100 g/mol. Based on a quantitative evaluation of the dispersions, the bare and coated particles were…
We demonstrate that the surface of the honeycomb lattice iridate Na$_2$IrO$_3$ is extremely tunable by plasma etching. We have succeeded in turning the surface of Na$_2$IrO$_3$ metallic by Ar plasma etching which leads to the removal of Na…
We detail a technique to produce actuators able to bear large strain and respond to an external magnetic field. The material used is PDMS reinforced with nickel coated carbon fibres. Thanks to the nickel functionalisation, the fibre…
We optimized designs of permanent magnet systems to study the effect of magnetic nanoparticles on cell cultures in microslide channels. This produced two designs, one of which is based on a large cylindrical magnet that applies a uniform…
Radiation damage tests in hydrogenated amorphous silicon (a-Si:H) flexible flux and dose-measuring devices have been performed with a 3 MeV proton beam, to evaluate combined displacement and total ionizing dose damage. The tested devices…
In this study structural and mechanical properties of a 1 um thick Al2O3 coating, deposited on 316L stainless steel by Pulsed Laser Deposition (PLD), subjected to high energy ion irradiation were assessed. Mechanical properties of pristine…