Related papers: Selective etching of PDMS: etching as a negative t…
Although, poly(dimethylsiloxane) (PDMS) is a widely used material in numerous applications, such as micro- or nanofabrication, the method of its selective etching has not been known up to now. In this work authors present two methods of…
Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 ohm.cm and 0.02 ohm.cm) in hydrofluoric (HF) acid of 24.5 precent…
Having a material that is matched in acoustic impedance with the surrounding medium is a considerable asset for many underwater acoustic applications. In this work, impedance matching is achieved by dispersing small, deeply subwavelength…
Porous silicon layers (PS) have been prepared in this work via Photoelectrochemical etching process (PEC) of n type silicon wafer of 0.8 ohm.cm resistivity in hydrofluoric (HF) acid of 24.5 precent concentration at different etching times…
Pulsed-laser dry printing of noble-metal microrings with a tunable internal porous structure, which can be revealed via an ion-beam etching post-procedure, was demonstrated. Abundance and average size of the pores inside the microrings were…
We have demonstrated the fabrication and characterization of 2D liquid-based multimode optical waveguide structures over a Polydimethylsiloxane (PDMS) material-based chip. Fabrication of two separate microstructures, one with a width of 14…
Modification of surfaces to enable dropwise condensation is a promising approach for achieving high condensation rates. In this work, we present an experimental study on condensation of water on copper surfaces coated with an ultrathin, 5…
The rise of micro/nanooptics and lab-on-chip devices demands the fabrication of three-dimensional structures with decent resolution. Here, we demonstrate the combination of grayscale electron beam lithography and direct forming methodology…
Flexible microfluidics have found extensive utility in the biological and biomedical fields. A leading substrate material for compliant devices is polydimethylsiloxane (PDMS). Despite its many advantages, PDMS is inherently hydrophobic and…
In this work we present some results of the treatment of polydimethylsiloxane (PDMS) surfaces using pulsed dielectric barrier discharge plasmas. The results of plasma treatment using different gases and mixtures, argon, argon plus water…
Integrating layered two-dimensional (2D) materials into 3D heterostructures offers opportunities for novel material functionalities and applications in electronics and photonics. In order to build the highest quality heterostructures, it is…
A comparison of porous structures formed from silicon (Si) wafers with different resistivities has been reported here based on the morphological studies carried out using scanning electron microscope (SEM). The porous Si samples have been…
Oxide Y2.5Nd0.5Al5O12 (YAG:Nd) with garnet structure was synthesized in the powder and ceramics forms. Fine-grained YAG:Nd ceramics with a relative density of ~99% were obtained by the Spark Plasma Sintering method (SPS). The radiation…
Electromagnetic metamaterials are a class of materials which have been artificially structured on a subwavelength scale. They are currently the focus of a great deal of interest because they allow access to previously unrealisable…
The ability to form diamond electrodes on insulating polycrystalline diamond substrates using single-step laser patterning, and the use of the electrodes as a substrate that supports the adhesion and proliferation of human mesenchymal stem…
We report the development of magnetic nanocomposite sheets with superhydrophobic and superoleophilic surfaces generated by laser ablation. Polydimethylsiloxane elastomer freestanding films, loaded homogeneously with 2% wt. carbon coated…
Durable delustered PET (PET-TiO2) fabrics super hydrophilic surface has been obtained by plasma selecting etching. The aging effect of their hydrophilicity after plasma treatment has been investigated with storage time. After Ar/O2 radio…
Recently-demonstrated high-quality three-dimensional (3D) subsurface laser processing inside crystalline silicon (c-Si) wafers opens a door to a wide range of novel applications in multidisciplinary research areas. Using this technique, a…
Charge collection properties of depleted CMOS pixel detector prototypes produced on p-type substrate of 2 k$\Omega$cm initial resistivity (by LFoundry 150 nm process) were studied using Edge-TCT method before and after neutron irradiation.…
Nuclear emulsions are capable of very high position resolution in the detection of ionizing particles. This feature can be exploited to directly resolve the micrometric-scale fringe pattern produced by a matter-wave interferometer for low…