Related papers: Hybrid single-electron turnstiles with thick super…
We investigate the properties of a hybrid single electron transistor, involving a small superconducting island sandwiched between normal metal leads, which is driven by dc plus ac voltages. In order to describe its properties we derive from…
In a hybrid Superconductor - Insulator - Normal metal tunnel junction biased just below the gap, the extraction of hot electrons out of the normal metal results in electronic cooling effect. The quasiparticles injected in the superconductor…
We report the demonstration of hybrid high-Tc-superconductor-semiconductor tunnel junctions, enabling new interdisciplinary directions in condensed matter research. The devices were fabricated by our newly-developed mechanical bonding…
We have investigated the static, charge-trapping properties of a hybrid superconductor---normal metal electron turnstile embedded into a high-ohmic environment. The device includes a local Cr resistor on one side of the turnstile, and a…
We demonstrate an original method -- based on controlled oxidation -- to create high-quality tunnel junctions between superconducting Al reservoirs and InAs semiconductor nanowires. We show clean tunnel characteristics with a current…
A novel method to fabricate large-area superconducting hybrid tunnel junctions with a suspended central normal metal part is presented. The samples are fabricated by combining photo-lithography and chemical etch of a superconductor -…
We perform in-situ detection of individual electrons pumped through a single-electron turnstile based on ultrasmall normal metal - insulator - superconductor tunnel junctions. In our setup, limited by the detector bandwidth, at low…
We discuss inherent thermometry in a Superconductor - Normal metal - Superconductor tunnel junction. In this configuration, the energy selectivity of single-particle tunneling can provide a significant electron cooling, depending on the…
In this work, we review and expand recent theoretical proposals for the realization of electronic thermal diodes based on tunnel-junctions of normal metal and superconducting thin films. Starting from the basic rectifying properties of a…
We demonstrate a technique for creating high quality, large area tunnel junction barriers for normal-insulating- superconducting or superconducting-insulating-superconducting tunnel junctions. We use atomic layer depo- sition and an…
Diodes are key elements for electronics, optics, and detection. The search for a material combination providing the best performances for the required application is continuously ongoing. Here, we present a superconducting spintronic tunnel…
This letter presents experiments on junctions fabricated by a new technique that enables the use of high quality aluminum oxide tunnel barriers with normal metal electrodes at low temperatures. Inverse proximity effect is applied to…
We have fabricated superconductor-quantum dot-superconductor (SC-QD-SC) junctions by using SC aluminum electrodes with narrow gaps laterally contacting a single self-assembled InAs QD. The fabricated junctions exhibited clear Coulomb…
We report the development of superconducting tantalum nitride (TaN$_{x} $) normal metal-insulator-superconductor (NIS) tunnel junctions. For the insulating barrier, we used both AlO$_{x}$ and TaO$_{x}$ (Cu-AlO$_{x}$-Al-TaN$_{x} $ and…
We have successfully fabricated Cu/AlOx-Al/Nb normal-metal/insulator/superconductor tunnel junction devices with a high value of the superconducting gap (up to $\sim 1$ mV), using electron-beam lithography and angle evaporation techniques…
A superconducting tunnel junction is used to directly extract quasiparticles from one of the leads of a single-Cooper-pair-transistor. The consequent reduction in quasiparticle density causes a lower rate of quasiparticle tunneling onto the…
Superconducting tunnel junctions are being developed for application as photon detectors in astronomy. We present the latest results on the development of very high quality, very low critical temperature junctions, fabricated out of pure Al…
A microscopic model is constructed which is able to describe multiple magnetic flux transitions as observed in recent ultra-low temperature tunnel experiments on an aluminum superconducting ring with normal metal - insulator -…
In this work, we investigate the thermoelectric properties of a hybrid junction realised coupling surface states of a three-dimensional topological insulator with a conventional $s$-wave superconductor. We focus on the ballistic devices and…
We investigate the behavior of quasiparticles in a hybrid electron turnstile with the aim of improving its performance as a metrological current source. The device is used to directly probe the density of quasiparticles and monitor their…