Related papers: Resistive switching in MoSe$_{2}$/BaTiO$_{3}$ hybr…
In the present work, multi-level resistive switching (RS) in W/Co:TiO2/FTO structures induced by a multi-mixed mechanism was studied. It was found that the devices could be reproducibly programmed into three nonvolatile resistance states.…
Superlattices may play an important role in next generation electronic and spintronic devices if the key-challenge of the reading and writing data can be solved. This challenge emerges from the coupling of low dimensional individual layers…
Bipolar resistive switching (BRS) phenomenon has been demonstrated in Mn3O4 using Al (Aluminum)/Mn3O4/FTO (Fluorine doped Tin Oxide) Resistive Random Access Memory (RRAM) device. The fabricated RRAM device shows good retention, non volatile…
Controlled bipolar resistive switching (BRS) has been observed in nanostructured CoFe2O4 films using Al(aluminum)/CoFe2O4/FTO(fluorine-doped tin oxide) device. The fabricated device shows electroforming-free uniform BRS with two clearly…
Resistive and capacitive switching in capacitor metal/nanocomposite/metal (M/NC/M) structures based on (CoFeB)x(LiNbO3)100-x NC fabricated by ion-beam sputtering with metal content x $\approx$ 8-20 at. % is studied. The peculiarity of the…
During the study of resistive switching devices, researchers have found that the influence of the insertion layer cannot be ignored. Many reports have confirmed that the appropriate insertion layer can significantly improve the performance…
In this work, we investigate the underlying physical mechanism for electric-field induced resistive switching in Au/MoS2/Au based memristive devices by combining reactive Molecular Dynamics (MD) and ab-initio quantum transport calculations.…
Transition-metal oxide films, demonstrating the effects of both threshold and nonvolatile memory resistive switching, have been recently proposed as candidate materials for storage-class memory. In this work we describe some experimental…
High-performance non-volatile resistive random access memories (ReRAM) and their small stimuli control are of immense interest for high-speed computation and big-data processing in the emergent Internet of Things (IOT) arena. Here, we…
Using metal-ferroelectric junctions as switchable diodes was proposed several decades ago. This was shown to actually work in PbZr(1-x)TixO3 (PZT) by Blom et al. [P.W. M. Blom et al., Phys. Rev. Lett. 73, 2107 (1994)], who reported…
We investigate ferroelectric- and resistive switching behavior in 18-nm-thick epitaxial BaTiO$_3$ (BTO) films in a model electrolyte-ferroelectric-semiconductor (EFS) configuration. The system is explored for its potential as a…
Neuromorphic computing circuits can be realized using memristors based on low-dimensional materials enabling enhanced metal diffusion for resistive switching. Here, we investigate memristive properties of vertically aligned MoS$_2$…
We study the resistive switching triggered by an applied electrical bias in antiferromagnetic Mott insulator Sr(3)Ir(2)O(7). The switching was previously associated with an electric-field driven structural transition. Here we use…
Non-volatile resistive switching, also known as memristor effect in two terminal devices, has emerged as one of the most important components in the ongoing development of high-density information storage, brain-inspired computing, and…
Non-volatile resistive switching is demonstrated in memristors with nanocrystalline molybdenum disulfide (MoS$_2$) as the active material. The vertical heterostructures consist of silicon, vertically aligned MoS$_2$ and chrome / gold metal…
Understanding the resistive switching behavior, or the resistance change, of oxide-based memristor devices, is critical to predicting their responses with known electrical inputs. Also, with the known electrical response of a memristor, one…
In this work, we unveil the effect of RS, induced by a current-voltage hysteresis cycles across CVD-grown monolayer MoS2 based gated RRAM, on its transistors electrical and reliability characteristics. A unique gate voltage dependence on…
We report on resistive switching (RS) characteristics of W/WO3-x/Pt-based thin film memristors modulated by precisely controlled oxygen non-stoichiometry. RS properties of the devices with varied oxygen vacancy (VO) concentration have been…
Resistive switching devices herald a transformative technology for memory and computation, offering considerable advantages in performance and energy efficiency. Here we employ a simple and scalable material system of conductive oxide…
Here we demonstrate that both, tunnel magneto resistance (TMR) and resistive switching (RS), can be observed simultaneously in nano-scale magnetic tunnel junctions. The devices show bipolar RS of 6 % and TMR ratios of about 100 %. For each…