Related papers: The Effect of Temperature on Cu-K-In-Se Thin Films
Epitaxial Fe(Se,Te) thin films were prepared by pulsed laser deposition on (La0.18Sr0.82)(Al0.59Ta0.41)O3 (LSAT), CaF2-buffered LSAT and bare CaF2 substrates, which exhibit an almost identical in-plane lattice parameter. The composition of…
The phase immiscibility and the excellent matching between Ag(001) and Fe(001) unit cells (mismatch 0.8 %) make Fe/Ag growth attractive in the field of low dimensionality magnetic systems. Intermixing could be drastically limited at…
The effect of vacuum annealing thin films of the compensated ferrimagnetic half-metal Mn2RuxGa at temperatures from 250 to 400 degree Celsius is investigated. The 39.3 nm films deposited on (100) MgO substrates exhibit perpendicular…
Ca- and Zn-subsituted Y1-xCaxBa2(Cu1-yZny)O7-delta (x = 0, 0.05 and y = 0, 0.02, 0.04, 0.05) thin films were grown on SrTiO3 (100) substrates using the pulsed laser deposition (PLD) technique. Effects of various growth parameters on the…
Thin films of VO$_2$ on different substrates, Al$_2$O$_3$ and SiO$_2$/Si, have been prepared and characterized from room temperature up to 360 K. From the band structure in the rutile metallic phase and in the monoclinic insulating phase…
In this paper, we report the growth of NaxCoO2 thin films by pulsed-laser deposition (PLD). It is shown that the concentration of sodium is very sensitive to the substrate temperature and the target-substrate distance due to the evaporation…
Stabilized FeSe thin films in ambient pressure with tunable superconductivity would be a promising candidate for superconducting electronic devices yet its superconducting transition temperature (Tc) is below 10 K in bulk materials. By…
The thermal conductivity (k) of polycrystalline silicon carbide thin films is relevant for thermal management in emerging silicon carbide applications like MEMS and optoelectronic devices. In such films k can be substantially reduced by…
Physical vapor high-temperature deposition of CdTe thin films is one of the main methods for preparing high-efficiency CdTe solar cells, but high-temperature deposition also has an impact on the internal structure of the film. The…
Cu added CdS films were synthesized using spin coating technique at different spin speeds for different time durations. Films were subsequently annealed at different temperatures for different time periods in air to crystallize the phase of…
We demonstrate the growth of Co-doped BaFe2As2 (Ba-122) thin films on AEF2 (001) (AE: Ca, Sr, Ba) single crystal substrates using pulsed laser deposition. All films are grown epitaxially despite of a large misfit of -10.6% for BaF2…
10 nm and 50 nm Co$_{2}$FeAl (CFA) thin films have been deposited on MgO(001) and Si(001) substrates by magnetron sputtering and annealed at different temperatures. X-rays diffraction revealed polycrystalline or epitaxial growth (according…
This Letter reports an anomaly of film porosity dependence on deposition rate during physical vapor deposition - the porosity increases as deposition rate decreases. Using glancing angle deposition of Cu on SiO2 substrate, the authors show…
Herein, we report CeIrIn5 thin-film growth on a MgF2 (001) substrate using pulsed laser deposition technique. X-ray diffraction analysis showed that the thin films were either mainly a-axis-oriented (TF1) or a combination of a- and…
In order to investigate the effects of in-plane strain on the superconductivity of FeSe, epitaxial thin films of FeSe were fabricated on CaF$_2$ substrates. The films are compressed along the a-axis and their superconducting transition…
Optical properties of the short period {CdO/ZnO} superlattices grown by plasma assisted MBE were analyzed. The superlattice (SLs) structures were successfully obtained at different growth temperatures from 360 to 550 {\deg}C. Interestingly,…
Thin superconducting films of magnesium diboride (MgB2) with Tc \approx 24K were prepared on various oxide substrates by pulsed laser deposition (PLD) followed by an in-situ anneal. A systematic study of the influence of various in-situ…
Low resistivity (~3-24 mOhm.cm) with tunable n- and p-type phase pure Cu2O thin films have been grown by pulsed laser deposition at 25-200 0C by varying the background oxygen partial pressure (O2pp). Capacitance data obtained by…
Low temperature solution combustion synthesis emerges as a facile method for synthesis of functional metal oxides thin films for electronic applications. We study the solution combustion synthesis process of Cu:NiOx using different molar…
We investigate the effect of post-deposition annealing (for temperatures from 848 K to 1273 K) on the chemical properties of crystalline Ta$_2$O$_5$ films grown on Si(100) substrates by radio frequency magnetron sputtering. The atomic…