Related papers: Broadband Millimeter-Wave Anti-Reflection Coatings…
We designed, fabricated, and characterized the properties of a silicon-based vacuum window suitable for millimeter-wave astrophysical applications. The window, which has a diameter of 124 mm, optically active diameter of 68 mm, and…
We report a high Responsivity broad band photo-detector working in the wavelength range 400 nm to 1100 nm in a horizontal array of Si microlines (line width ~1 micron) fabricated on a Silicon-on-Insulator (SOI) wafer. The array was made…
Refractive optical elements are widely used in millimeter and sub-millimeter astronomical telescopes. High resistivity silicon is an excellent material for dielectric lenses given its low loss-tangent, high thermal conductivity and high…
We have developed epoxy-based, broadband anti-reflection coatings for millimeter-wave astrophysics experiments with cryogenic optics. By using multiple-layer coatings where each layer steps in dielectric constant, we achieved low reflection…
This work presents a new design for broadband absorption of low-frequency acoustic waves using a thin coating made of subwavelength acoustic resonators arranged periodically on a reflective surface. We first study the associated scattering…
Broadband mid-infrared (mid-IR) spectroscopy applications could greatly benefit from today's well-developed, highly scalable silicon photonics technology; however, this platform lacks broadband transparency due to its reliance on absorptive…
We have designed, optimized, fabricated and characterized highly reflective quasi-omnidirectional (angular range of $0-60^\circ$) multilayered structures with a wide spectral range. Two techniques, chirping (a continuous change in…
In this paper, the design, realization, and demonstration of a broadband millimeter-wave imaging system based on the synthetic aperture radar technique (SAR) are discussed. The proposed system, operating within the frequency range of…
Antireflection coatings are an interesting challenge for multijunction solar cells due to their broadband spectrum absorption and the requirement of current matching of each subcell. A new design for multijunction solar cell antireflection…
Short (40-200 microseconds) single focused CO2 laser pulses of energy of about 100 microJ were used to fabricate high quality concave micromirror templates on silica and fluoride glass. The ablated features have diameters of 20-100 microns…
Laser cutting of semiconductor wafers and transparent dielectrics has become a dominant process in manufacturing industries, encompassing a wide range of applications from flat display panels to microelectronic chips. Limited by the…
Transformation optics methods and gradient index electromagnetic structures rely upon spatially varied arbitrary permittivity. This, along with recent interest in millimeter-wave lens-based antennas demands high spatial resolution…
The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics…
Subwavelength-scale light absorbers and reflectors have gained significant attention for their potential in photonic applications. These structures often utilize a metal-insulator-metal (MIM) architecture, similar to a Fabry-Perot…
We demonstrate low loss ridge waveguides and the first ring resonators for the mid-infrared, for wavelengths ranging from 5.4 to 5.6 {\mu}m. Structures were fabricated using electron-beam lithography on the silicon-on-sapphire material…
The BICEP/Keck series of experiments target the Cosmic Microwave Background at degree-scale resolution from the South Pole. Over the next few years, the "Stage-3" BICEP Array (BA) telescope will improve the program's frequency coverage and…
Imaging with sub-wavelength resolution using a lens formed by periodic metal-dielectric layered structure is demonstrated. The lens operates in canalization regime as a transmission device and it does not involve negative refraction and…
We present a high-yield method for fabricating concave micromirror templates in silica using feedback-controlled CO2 laser ablation with precise in situ positioning. Real-time monitoring of the white-light emission generated during ablation…
Recently, meta-surface(MS) has emerged as a promising alternative method for generating vortex waves. At the same time, MS also face the problem of narrow bandwidth, in order to obtain a board bandwidth, the MS unit cells structure become…
We report on multilayer high efficiency antireflection coating (ARC) design and development for use at UV wavelengths on CCDs and other Si-based detectors. We have previously demonstrated a set of single-layer coatings, which achieve >50%…