Related papers: Thin Film growth of Solid State materials
High quality ZnO thin films were gown using the pulsed laser deposition technique on (0001) Al$_2$O$_3$ substrates in an oxidizing atmosphere, using a Zn metallic target. We varied the growth conditions such as the deposition temperature…
During the growth of metal thin films on dielectric substrates at a given deposition temperature T, the film's morphology is conditioned by the magnitude and asymmetry of up- and downhill diffusion. Any severe change of this mechanism leads…
Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…
Sculptured copper thin films were deposited on glass substrates, using different deposition rates. The nano-structure and morphology of the films were obtained, using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning…
Structural and magnetic properties of Mn5(SixGe1-x)3 thin films were investigated. Ferromagnetic Mn5Ge3 and anti-ferromagnetic Mn5Si3 thin films have been synthesized and characterized as these compounds exhibit interesting features for the…
La2/3Ca1/3MnO3 thin films have been grown on yttria-stabilized zirconia (YSZ) buffered silicon-on-insulator (SOI) substrate by the pulsed laser deposition technique. While full cube-on-cube epitaxy was achieved for the YSZ layer, the top…
Using oxide substrates for functional ceramic thin film deposition beyond their usual application as chemical inert, lattice-matched support for the films represents a novel concept in ceramic thin film research. The substrates are applied…
Morphology and performance are conjointed attributes of metamaterials, of which sculptured thin films (STFs) are examples. STFs are assemblies of nanowires that can be fabricated from many different materials, typically via physical vapor…
Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at…
Thin films of polycrystalline $\beta$-Mn structure CoZn have been grown on thermally oxidized Si substrates by co-sputtering from elemental targets followed by annealing. A range of films grown with variable Co deposition power and fixed Zn…
In this work, the results of fabricating ultra thin VO$_2$ films on the technologically relevant amorphous SiO$_2$ surface using reactive DC magnetron sputtering are presented. Results indicate that a post deposition anneal in low partial…
TiZrV film is mainly applied in the ultra-high vacuum pipe of storage ring. Thin film coatings of palladium which was added onto the TiZrV film to increase the service life of nonevaporable getters and enhance pumping speed for H2, was…
The interplay between substrates and superconducting thin films has attracted increasing attention. Here, we report an in-depth investigation on superconducting properties of the epitaxial TiN thin films grown on three different substrates…
Nanoscale metallic multilayer (NMM) films are systems offering insight into the role of interfaces in metal plasticity, deformation, and strengthening mechanisms. Magnetron sputtering was used to fabricate the Ta-Cu NMM films with a…
A mathematical model is developed to analyze the growth/decay rate of surface perturbations of an ultrathin metal film on an amorphous substrate (SiO_{2}). The formulation combines the approach of Mullins [J. Appl. Phys. v30, 77, 1959] for…
Nanoporous thin-films are an important class of materials, offering a way to observe fundamental surface and bulk processes with particles larger than individual atoms, but small enough to interact significantly with each other through…
Different thicknesses of cobalt thin films were growth by magnetron sputtering deposition techniques. The films thicknesses were determinated with X ray Photoelectron Spectroscopy (XPS) and Quartz Crystal Monitoring (QCM). XPS is also used…
Nanocomposite thin films of Zinc Oxide and Silicon were grown by co-evaporating powdered ZnO and Si. This resulted in nanocrystallites of ZnO being embedded in Silicon. The mismatch in crystal structures of constituent materials result in…
We report the growth of thin films of Sr1-xCaxRuO3 on SrTiO3 and MgO substrates by metalorganic aerosol deposition. The structure and microstructure is characterized by X-ray diffraction and room-temperature scanning tunnelling microscopy…
Organic electronic materials have potential applications in a number of low-cost, large area electronic devices such as flat panel displays and inexpensive solar panels. Small molecules in the series Anthracene, Tetracene, Pentacene, are…