Related papers: Inkjet-printed vertically emitting solid-state org…
Stimulated emission in small-molecule organic films at a high dye concentration is generally hindered by fluorescence quenching, especially in the red region of the spectrum. Here we demonstrate the achievement of high net gains (up to 50…
The absence of efficient light modulators for extreme ultraviolet (EUV) and X-ray photons significantly limits their real-life application, particularly when even slight complexity of the beam patterns is required. Here we report on a novel…
Integrating conventional optics into compact nanostructured surfaces is the goal of flat optics. Despite the enormous progress of this technology, there are still critical challenges for real world applications due to a limited efficiency…
The present work demonstrates an electro-optic polymer based Mach-Zehnder (MZ) modulator fabricated utilizing advanced ultraviolet (UV) imprinting and aligned ink-jet printing technologies for patterning and layer deposition. The bottom…
Pulsed-laser dry printing of noble-metal microrings with a tunable internal porous structure, which can be revealed via an ion-beam etching post-procedure, was demonstrated. Abundance and average size of the pores inside the microrings were…
Inkjet printing technology achieves the precise deposition of liquid-phase materials via the digitally controlled formation of picoliter-sized droplets. Beyond graphical printing, inkjet printing has been employed for the deposition of…
Angle-independent, narrowband emission is required for many optoelectronic devices, ranging from high-definition displays to sensors. However, emerging materials for electroluminescent devices, such as organics and perovskites, show…
A direct electronics printing technique through atomized spraying for patterning room temperature liquid metal droplets on desired substrate surfaces is proposed and experimentally demonstrated for the first time. This method has…
Vector vortex beams simultaneously carrying spin and orbital angular momentum of light promise additional degrees of freedom for modern optics and emerging resources for both classical and quantum information technologies. The inherently…
The use of a thin mixed layer consisting of an inert diluent material and a light emitting material between the hole-transport layer and electron-transport layer of organic light-emitting diodes leads to an increase in the external quantum…
The inkjet-fabricated liquid crystal (LC) droplet device not only capitalizes on the intrinsic birefringence properties of liquid crystals but also leverages the hemispherical shape of droplet devices on substrates. This configuration…
This paper presents the initial development of a robotic additive manufacturing technology based on ultraviolet (UV)-curable thermoset polymers. This is designed to allow free-standing printing through partial UV curing and fiber…
Vertical external-cavity surface-emitting lasers (VECSELs) augmented by intra-cavity nonlinear optical frequency conversion have emerged as an attractive light source of ultraviolet to visible light for demanding scientific applications,…
Surface lattice resonance (SLR) lasers, where gain is supplied by a thin film active material and the feedback comes from multiple scattering by plasmonic nanoparticles, have shown both low threshold lasing and tunability of the angular and…
We demonstrate for the first time controlled patterning by inducing nucleation of material from a dense aqueous dispersion or solution in an optical tweezers. A hot spot is formed on a glass surface by the trapping laser due to which a…
A low-cost compound super-resolution lens, consisting of a Plano-Convex lens and a Microsphere lens (PCM), was proposed and demonstrated for subwavelength direct laser scanning writing application. The PCM lens can achieve a far-field…
We present a novel high-power, frequency-stabilized UV laser source at 326.2~nm, resonant with the Cd $^{1}$S$_{0}$ - $^{3}$P$_{1}$ narrow intercombination transition. We have achieved a maximum produced power of 1~W at 326.2~nm by two…
We demonstrate the fabrication of millimeter-sized optical components using tomographic volumetric additive manufacturing (VAM). By purposely blurring the writing beams through the use of a large etendue source, the layer-like artifacts…
Air-stable semiconducting inks suitable for complementary logic are key to create low-power printed integrated circuits (ICs). High-performance printable electronic inks with two-dimensional materials have the potential to enable the next…
Technologies that require surface wetting or evaporative cooling require the ability to efficiently spread fluids across large areas, as increased wetted surface area increases evaporative flux. However, the intrinsic surfacial and bulk…