Related papers: Ballistic Deposition of Nanoclusters
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
We propose a numerical tool to mimic the pulsed deposition of nanoparticles, a technique used to fabricate thin films from the deposition of nanoparticles upon a substrate. We employ such tool under different initial conditions, in…
In order to get homogeneous nanostructured Aluminum Nitride deposits, thin films were grown at room temperature on [001] Si substrates by radio frequency magnetron reactive sputtering. The deposits were analysed by Transmission Electron…
The atomistic structure of metallic glasses is closely related to properties such as strength and ductility. Here, Ni1-xBx metallic glass nanoparticles of two different sizes are compressed under quasi-hydrostatic high-pressure conditions…
Numerical Simulations are employed to create amorphous nano-films of a chosen thickness on a crystalline substrate which induces strain on the film. The films are grown by a vapor deposition technique which was recently developed to create…
Nanocrystals of indium oxide (In$_2$O$_3$) with sizes below 10 nm were prepared in alumina matrixes by using a co-pulverization method. The used substrates such as borosilicate glasses or (100) silicon as well as the substrate temperatures…
A "two-dimensional ballistic deposition" (2D-BD) code has been developed to study the geometric effects in ballistic deposition of thin-film growth. Circular discs are used as depositing specie to understand the shadowing effects during the…
The growth of a rough and porous thin surface by deposition of randomly shaped clusters with different sizes over an initially flat linear substrate is simulated, using Monte Carlo technique. Unlike the ordinary Random Deposition, our…
Clustering and dynamics of nano-sized particles (nano dust) is investigated using high-resolution ($1024^3$) simulations of compressible isothermal hydrodynamic turbulence, intended to mimic the conditions inside cold molecular clouds in…
We report on the structural and superconducting properties of nanocrystalline tungsten thin films growth by sputtering at room temperature with an N2:Ar mixture (N2 from 3% to 50%). The crystalline phases were identified by comparing…
In-situ monitoring and calibration of nano-sculptured thin film thickness is a critical problem due to substrate tilt angle dependent porosity and mass flux. In this letter we present an analytical model for thickness dependence on…
Magnetron sputtering has also been used to deposit thin films of some materials and it has significant technological importance. A modeling on deposition of epitaxial thin films of Yttrium Stabilized Zirconia (YSZ) was done the diffusion of…
We present the results of experiments on synthesis of ZnO nanoclusters by reactive pulsed laser deposition (PLD). The nanoclusters were formed and crystallized in the gas phase and deposited on SiO2 substrates. The nanostructured films were…
Thin films from the lanthanum vanadate nanoparticles were successfully grown by pulsed laser deposition method on glass and silicon substrates for the first time. Morphology and thickness of the films depend on a type of substrate and a…
Nanostructured films obtained by the assembling of preformed atomic clusters are of strategic importance for a wide variety of applications. The deposition of clusters produced in the gas phase onto a substrate offers the possibility to…
We observe that gold atoms deposited by physical vapor deposition onto few layer graphenes condense upon annealing to form nanoparticles with an average diameter that is determined by the graphene film thickness. The data are well described…
Atomically controlled crystal growth of thin films has established foundations of nanotechnology aimed at the development of advanced functional devices. Crystallization under non-equilibrium conditions allows engineering of new materials…
In this work, Pt-Ti core-shell nanoparticles (NP) of 2 nm to 3 nm in size and 30000 u \pm 1500 u as specified single particle mass, deposited on flat silicon substrates by means of a mass-selected cluster beam source, were used for the…
We investigate the clustering and dynamics of nano-sized particles (nano-dust) in high-resolution ($1024^3$) simulations of compressible isothermal hydrodynamic turbulence. It is well-established that large grains will decouple from a…
Sculptured copper thin films were deposited on glass substrates, using different deposition rates. The nano-structure and morphology of the films were obtained, using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning…