Related papers: Characterization of the GEM foil materials
Effective water management is essential for the optimal performance of PEM fuel cells. We have developed an impedance model for liquid water transport through the membrane and coupled it with the two-phase model for cathode side impedance.…
A theoretical model of electromigrative, diffusive and convectivetransport polymer-gel composites is presented. Bulk properties are derived from the standard electrokinetic model with an impenetrable charged sphere embedded in an…
The occurrence of electrical discharges in gas detectors restricts their dynamic range and degrades their performance. Among the different methods developed to mitigate discharge effects, the use of resistive materials in the detector…
Compton scattering is a well-established technique that can provide detailed information about electronic states in solids. Making use of the principle of tomography, it is possible to determine the Fermi surface from sets of…
A Time Projection Chamber (TPC) using micro-pattern gas detectors is planned as the main tracking device for a detector at the next Linear Collider. A novel support structure for Gas Electron Multipliers (GEMs), which minimizes the material…
The aim of the study is to compare the standard Maxwell-Stefan model of diffusion with the higher-order one recently derived. This higher-order model takes into account the influence of the complete pressure tensor. A numerical scheme is…
Ever since modeling has become a mature part of proton exchange membrane fuel cell (PEMFC) research and development, it has been plagued by significant uncertainty lying in the detailed knowledge of material properties required.…
We have developed a novel technique for the measurement of the size of avalanche fluctuations of gaseous detectors using a gating device (gating foil) prepared for the time projection chamber in the international linear collider experiment…
We apply a pulsed-light interferometer to measure both the intensity and the phase of light that is transmitted through a strongly scattering disordered material. From a single set of measurements we obtain the time-resolved intensity,…
Characterizing the connection between material design decisions/parameters and their effective properties allows for accelerated materials development and optimization. We present a global sensitivity analysis of woven composite…
We developed a method to make GEM foils with a spherical geometry. Tests of this procedure and with the resulting spherical GEMs are presented. Together with a spherical drift electrode, a spherical conversion gap for x-rays can be formed.…
This paper presents a simple model for predicting electrical conductivity of air with varying electrode separation and different moisture content present in air. Our system consists of a metallic thin film (Cu) coated sample and a needle…
Diffusion models have shown remarkable capabilities in generating high-fidelity data across modalities such as images, audio, and video. However, their computational intensity makes deployment on edge devices a significant challenge. This…
A comprehensive analysis of the effects of Geant4 algorithms for condensed transport in detectors is in progress. The first phase of the project focuses on electron multiple scattering, and studies two related observables: the longitudinal…
Advances in fabrication techniques and high-performance electronics have facilitated the development of fine-pitch Gas Electron Multipliers (GEMs). Earlier experimental and simulation findings suggest that these reduced-pitch GEMs can…
A wire GEM (WGEM) detector with a gas gap between meshes was constructed. The detector provides the amplification 5x10E5 for the gas mixture of Ar +20% CO2 at atmospheric pressure. As compared with well-known GEM detectors produced by…
In this paper, measurement results and experimental methodology are presented on the determination of multiplication distributions of avalanches initiated by single electron in GEM foils. The measurement relies on the amplification of…
The upgrade of the CMS detector for the high luminosity LHC (HL-LHC) will include gas electron multiplier (GEM) detectors in the end-cap muon spectrometer. Due to the limited supply of large area GEM detectors, the Korean CMS (KCMS)…
: It goes without saying that at present MEMS Technology became one of the latest and emerging methods because of its miniaturization and effective cost. Now near the beginning recognition of disease became a major challenge in front of…
The effect of conformational fluctuations of modular macromolecules, such as enzymes, on their diffusion properties is addressed using a simple generic model of an asymmetric dumbbell made of two hydrodynamically coupled subunits. It is…