Related papers: Iterative Eigenvalue Decomposition and Multipath-G…
In this paper, we consider channel estimation for intelligent reflecting surface (IRS)-assisted millimeter wave (mmWave) systems, where an IRS is deployed to assist the data transmission from the base station (BS) to a user. It is shown…
A hybrid transmit precoder (TPC) and receive combiner (RC) pair is conceived for millimeter wave (mmWave) multiple input multiple output (MIMO) integrated sensing and communication (ISAC) systems. The proposed design considers a practical…
Coherent Plane Wave Compounding (CPWC) is widely used for ultrasound imaging. This technique involves sending plane waves into a sample at different transmit angles and recording the resultant backscattered echo at different receive…
To establish reliable and long-range millimeter-wave (mmWave) communication, beamforming is deemed to be a promising solution. Although beamforming can be done in the digital and analog domains, both approaches are hindered by several…
Connected and Autonomous Vehicles (CAVs) require continuous access to sensory data to perform complex high-speed maneuvers and advanced trajectory planning. High priority CAVs are particularly reliant on extended perception horizon…
In this paper, we develop an algorithm for joint handover and beam tracking in millimeter-wave (mmWave) networks. The aim is to provide a reliable connection in terms of the achieved throughput along the trajectory of the mobile user while…
Millimeter wave (mmWave) full-duplex (FD) is a promising technique for improving capacity by maximizing the utilization of both time and the rich mmWave frequency resources. Still, it has restrictions due to FD self-interference (SI) and…
In order to cope with the large path-loss exponent of mm-Wave channels, a high beamforming gain is needed. This can be achieved with small hardware complexity and high hardware power efficiency by Hybrid Digital-Analog (HDA) beamforming,…
In this paper, assuming multi-antenna transmitter and receivers, we consider multicast beamformer design for the weighted max-min-fairness (WMMF) problem in a multi-stream multi-group communication setup. Unlike the single-stream scenario,…
We consider an integrated sensing and communication (ISAC) system with a single communication user and multiple targets. For the communication functionality, the achievable rate is employed as the performance metric, while for sensing, we…
Integrated sensing and communication (ISAC) relies on monostatic sensing (MS) and bistatic positioning (BP) to enable comprehensive environmental awareness and user localization. However, existing frameworks predominantly assume static…
Sensor-aided beamforming reduces the overheads associated with beam training in millimeter-wave (mmWave) multi-input-multi-output (MIMO) communication systems. Most prior work, though, neglects the challenges associated with establishing…
Accurate channel parameter estimation is challenging for wideband millimeter-wave (mmWave) large-scale hybrid arrays, due to beam squint and much fewer radio frequency (RF) chains than antennas. This paper presents a novel joint delay and…
This paper studies a multi-target multi-user integrated sensing and communication (ISAC) system where a multi-antenna base station (BS) communicates with multiple single-antenna users in the downlink and senses the unknown and random angle…
Millimeter Wave (mmWave) communications with full-duplex (FD) have the potential of increasing the spectral efficiency, relative to those with half-duplex. However, the residual self-interference (SI) from FD and high pathloss inherent to…
The convergence of sensing and communication in the millimeter-wave (mmWave) and low terahertz (THz) bands has been envisioned as a promising technology, since it incorporates high-rate data transmission of hundreds of Gbps and mm-level…
5G millimeter wave (mmWave) signals can enable accurate positioning in vehicular networks when the base station and vehicles are equipped with large antenna arrays. However, radio-based positioning suffers from multipath signals generated…
Synergistic design of communications and radar systems with common spectral and hardware resources is heralding a new era of efficiently utilizing a limited radio-frequency spectrum. Such a joint radar-communications (JRC) model has…
This paper investigates the joint design of the beamforming scheme in intelligent reflecting surface (IRS) assisted multiuser (MU) multiple-input multiple-output (MIMO) downlink transmissions. Channel estimation errors associated with the…
A novel modular extremely large-scale multiple-input-multiple-output (XL-MIMO) integrated sensing and communication (ISAC) framework is proposed in this paper. We consider a downlink ISAC scenario and exploit the modular array architecture…