Related papers: Symmetric Complementary Logic Inverter Using Integ…
Photodetectors based on two-dimensional (2D) atomically thin semiconductors suffer from low light absorption, limiting their potential for practical applications. In this work, we demonstrate a high-performance MoS2 phototransistors by…
In comparison to the conventional complementary pull-up and pull-down logic structure, the pass transistor logic (PTL) family reduces the number of transistors required to perform logic functions, thereby reducing both area and power…
The development of two-dimensional (2D) room temperature magnets is of great significance to the practical application of spintronic devices. However, the number of synthesized intrinsic 2D magnets is limited and the performances of them…
Few-layer phosphorene MOSFETs with 0.3-um-long gate and 15-nm-thick Al2O3 gate insulator was found to exhibit a forward-current cutoff frequency of 2 GHz and a maximum oscillation frequency of 8 GHz after de-embedding for the parasitic…
We report the fabrication of back-gated field-effect transistors (FETs) using ultra-thin, mechanically exfoliated MoSe2 flakes. The MoSe2 FETs are n-type and possess a high gate modulation, with On/Off ratios larger than 106. The devices…
The recent emergence of a wide variety of two-dimensional (2D) materials has created new opportunities for device concepts and applications. In particular, the availability of semiconducting transition metal dichalcogenides, in addition to…
Recently emerging large-area single-layer MoS2 grown by chemical vapor deposition has triggered great interest due to its exciting potential for applications in advanced electronic and optoelectronic devices. Unlike gapless graphene, MoS2…
The switchable optical and electrical properties of phase change materials (PCMs) are finding new applications beyond data storage in reconfigurable photonic devices. However, high power heat pulses are needed to melt-quench the material…
Two-dimensional (2D) semiconductors are promising for low-power complementary metal oxide semiconductor (CMOS) electronics, which require ultrathin n- and p-type transistor channels. Among 2D semiconductors, WS2 is expected to have good…
The ability to detect light over a broad spectral range is central for practical optoelectronic applications, and has been successfully demonstrated with photodetectors of two-dimensional layered crystals such as graphene and MoS2. However,…
Two-dimensional (2D) materials are a new class of materials with interesting physical properties and ranging from nanoelectronics to sensing and photonics. In addition to graphene, the most studied 2D material, monolayers of other layered…
We report ambipolar transport properties in black phosphorus using an electric-double-layer transistor (EDLT) configuration. The transfer curve clearly exhibits ambipolar transistor behavior with an ON-OFF ratio of 5*10^3. The band gap was…
We propose a steep-slope MoS2-nanoribbon field-effect transistor that exploits a narrow-energy conduction band to intrinsically filter out the thermionic tail of the electron energy distribution. We study the device operation principle and…
Ferroelectric field-effect transistors integrated on 2D semiconducting platforms are extremely relevant for low power electronics. Here, we propose and demonstrate a novel phase-change ferroelectric field effect transistor (PCFE-FET) for…
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave…
Atomically thin layered two-dimensional materials, including transition-metal dichacolgenide (TMDC) and black phosphorus (BP), (1) have been receiving much attention, because of their promising physical properties and potential applications…
We demonstrate monolayer MoS2 grown by chemical vapor deposition (CVD) with transport properties comparable to those of the best exfoliated devices over a wide range of carrier densities (up to ~10^13 1/cm^2) and temperatures (80-500 K).…
Semiconducting MoTe2 is one of the few two-dimensional (2D) materials with a moderate band gap, similar to silicon. However, this material remains under-explored for 2D electronics due to ambient instability and predominantly p-type Fermi…
Molybdenum disulfide is considered as one of the most promising two-dimensional semiconductors for electronic and optoelectronic device applications. So far, the charge transport in monolayer molybdenum disulfide is dominated by extrinsic…
Layered two-dimensional (2D) materials provide a wide range of unique properties as compared to their bulk counterpart, making them ideal for heterogeneous integration for on-chip interconnects. Hence, a detailed understanding of the loss…