Related papers: Multi-bunch injection for SSRF storage ring

The electron multipacting is an important factor for the development of the electron cloud. There is a trailing-edge multipacting in the tail of the long-bunch beam. It can be described by the energy gain and motion of electrons. The…

The micro-bunching instability is a longitudinal instability that leads to dynamical deformations of the charge distribution in the longitudinal phase space. It affects the longitudinal charge distribution, and thus the emitted coherent…

We present the design of a high repetition rate MeV energy ultrafast electron diffraction instrument based on a DC photoelectron gun and an SRF linac with multiple independently controlled accelerating and bunching cavities. The design is…

We introduce a solution for producing ultrashort ($\sim$fs) high charge ($\sim$pC) from ultra-compact guns utilizing single-cycle THz pulses. We show that the readily available THz pulses with energies as low as 20 ?J are sufficient to…

Serial connection of multiple memory cells using perpendicular magnetic tunnel junctions (pMTJ) is proposed as a way to increase magnetic random access memory (MRAM) storage density. Multi-bit storage element is designed using pMTJs…

The Fast Bunch Integrator is a bunch intensity monitor designed around the measurements made from Resistive Wall Current Monitors. During the Run II period these were used in both Tevatron and Main Injector for single and multiple bunch…

KEK-ATF is doing R&D establishing high-current and low-emittance electron beam for the future linear colliders. In ATF, 15 ps length electron beam is generated by combination of a thermionic gun, a couple of 357 MHz SHBs, and a S-band TW…

Cooling of hadron beams is critically important in the next generation of hadron storage rings for delivery of unprecedented performance. One such application is the electron-ion collider presently under development in the US. The desire to…

High-brightness electron bunches, such as those generated and accelerated in free-electron lasers (FELs), can develop small-scale structure in the longitudinal phase space. This causes variations in the slice energy spread and current…

This study presents several novel approaches to improve the efficiency of a single-stage coil gun. Conventional designs typically feature a uniformly wound solenoid and a ferrite projectile. For our research, we constructed a…

We present the results of multi-objective genetic algorithm optimizations of a potential single shot ultra fast electron diffraction beamline utilizing a 100 MV/m 1.6 cell normal conducting rf (NCRF) gun, as well as a 9 cell 2pi/3 bunching…

At the SASE-FEL user facilities FLASH and European XFEL, superconducting TESLA type cavities are used for acceleration of the driving electron bunches. The high achievable duty cycle allows for operating with long bunch trains, hence…

The buildup of low-energy electrons has been shown to affect the performance of a wide variety of particle accelerators. Of particular concern is the persistence of the cloud between beam bunch passages, which can impose limitations on the…

Laser-plasma wakefield acceleration (LWFA) offers ultrahigh accelerating gradients in compact setups, but the complex non-linear nature of the process makes it challenging to generate high-quality beams. Injection of electron bunches from…

In this paper we introduce an analytical solution (up to the third order) for a multistage bunch compression and acceleration system without collective effects. The solution for the system with collective effects is found by an iterative…

CW magnetrons, developed for industrial heaters, but driven by an injection-locking signal were suggested to power Superconducting RF (SRF) cavities due to higher efficiency and lower cost of generated RF power per Watt than traditionally…

The Fermilab Booster uses multi-turn beam injection with all its cavities phased such that beam sees a net zero RF voltage even when each station is at the same maxi-mum voltage. During beam capture the RF voltage is increased slowly by…

Beam breakup instability is a potential issue for all particle accelerators and is often the limiting factor for the maximum beam current that can be achieved. This is particularly relevant for Energy Recovery Linacs with multiple passes…

High luminosity in DAFNE needs very high electron and positron currents stored. A full energy (510 MeV) injection system composed by a full energy electron and positron linac and an accumulator-damping ring is presently used. The electron…

The temporal resolution of MeV ultrafast electron diffraction (UED) is fundamentally constrained by the electron bunch length at the sample, motivating the development of new electron sources capable of producing femtosecond scale bunches.…