Related papers: Multi-bunch injection for SSRF storage ring
The production of high-quality electron bunches in Laser Wake Field Acceleration relies on the possibility to inject ultra-low emittance bunches in the plasma wave. In this paper we present a new bunch injection scheme in which electrons…
This paper presents the modeling of time-structured multiturn injection for an upgraded Main Injector with the 8-GeV Superconducting RF proton driver, or an ILC-style linac, or a Project-X linac. The Radio-Frequency mismatch between a linac…
In order to double the positron injection rate into the KEKB ring, a two-bunch acceleration scheme has been studied at the linac, in which bunches separated by 96 ns are accelerated in 50 Hz. In this scheme the stabilization of energy and…
Beam tail effect of multi-bunches will influence the electron beam performances in high intensity thermionic RF gun. Beam dynamic calculations that illustrate the working states of single and multi-pulse fed-in of performance-enhanced…
The Super Proton Synchrotron (SPS) injection system plays a fundamental role to preserve the quality of injected high-brightness beams for the Large Hadron Collider (LHC) physics program and to maintain the maximum storable intensity. The…
Slow extraction of bunched beams is widely used for mitigating the formation of micro structures due to ripples of the accelerator magnets power supplies on the extracted beam which is also referred to as spill. That helps, in particular,…
A review of electron beam bunching methods and new bunching methods are presented. Linear accelerator, storage ring and buncher technologies offer high-beam quality and short bunches necessary for operation of high efficiency, high-power,…
A problem of coupled-beam instability is solved for two multibunch beams with slightly different revolution frequencies, as in the Fermilab Recycler Ring (RR). Sharing of the inter-bunch growth rates between the intra-bunch modes is…
Free Electron Lasers driven by Super-Conducting Linacs require the generation, acceleration and transport of trains of bunches with high charge, high repetition rate and low emittance. A numerical model already developed for the modeling of…
For heavy-ion synchrotrons an efficient Multi-Turn Injection (MTI) from the injector linac is crucial in order to reach the specified currents using the available machine acceptance. The beam loss during the MTI must not exceed the limits…
In order to achieve its ambitious luminosity target, the SuperKEKB collider must achieve and sustain high beam currents on the order of Ampere in its storage rings. This requires continuous top-up injection and operation with a two-bunch…
High harmonic cavities are widely used in electron storage rings to lengthen the bunch, thereby enhancing the Touschek lifetime, reducing the IBS effect, as well as providing Landau damping. When the RF phase is modulated in such a dual-RF…
A novel parallel plate model is proposed that divided the electron cloud into three parts at saturation, and it is studied in detail using both an analytical approach and PIC (Particle In Cell) code simulations. As one part of the electron…
We present a novel concept for the generation of gigahertz repetition rate high brightness electron bunches. A custom design 100 kV thermionic gun provides a continuous electron beam, with the current determined by the filament size and…
The thermionic gridded gun is described which generates short electron bunches for further acceleration in a Nb3Sn conduction cooled SRF linac. The gun is built into the first cavity of the 250 keV injector [1] for the 20 kW, 10 MeV, 1.3…
A new beam injection scheme is proposed for the Fermilab Booster to increase beam brightness. The beam is injected on the deceleration part of the sinusoidal magnetic ramp and capture is started immediately after the injection. During the…
The PEP-II storage rings at SLAC each have 3492 'buckets' into which electrons and positrons can be injected into the high- and low-energy rings. Equipment to measure the currents of all the individual buckets was originally provided by the…
Particle accelerators as photon sources are advanced tools in studying the structure and dynamical properties of matter. The present workhorses of these sources are storage ring-based synchrotron radiation facilities and linear…
A new accelerator complex, HIAF (the High Intensity Heavy Ion Accelerator Facility), has been approved in China. It is designed to provide intense primary and radioactive ion beams for research in high energy density physics, nuclear…
Electron storage rings used for the production of synchrotron radiation (SR) have an output photon brightness that is limited by the equilibrium beam emittance. By using interleaved injection and ejection of bunches from a source with…