Related papers: A $55 Shock Tube for Simulated Blast Waves
A novel technique for measuring plasma conditions using monochromatic pump-broadband probe laser interactions has been experimentally demonstrated. Originally proposed in [J. Ludwig et al., Phys. Plasmas \textbf{26}, 113108 (2019)], this…
Here we describe the implementation and calibration of a streaked visible spectrometer (SVS) for optical pyrometry and emission/absorption spectroscopy on light gas gun platforms in the UC Davis Shock Compression Laboratory. The diagnostic…
Perfluorohexane is a biocompatible material that serves as a liquid core for acoustically-responsive agents in biomedical applications. Despite its relatively widespread usage, there is a lack of experimental data determining its…
A sealed high gas pressure detector working in pure argon is assembled. It consists of a 5 cm $\times$ 5 cm PCB THGEM (THick Gaseous Electron Multipliers). The detector structure and experimental setup are described. The performances under…
Experiments of water wicking in 1D silicon-dioxide nanochannels of heights 59 nm, 87 nm, 124 nm and 1015 nm are used to estimate the disjoining pressure of water which was found to be as high as ~1.5 MPa while exponentially decreasing with…
The impact of a plunging breaker on a partially submerged cube is explored experimentally in a wave tank equipped with a programable wave maker. The experiments are conducted with the cube (dimension $L=30.48$ cm) positioned at one…
Starting from coupled fluid-kinetic equations for the modeling of laden flows, we derive relevant viscous corrections to be added to asymptotic hydrodynamic systems, by means of Chapman-Enskog expansions and analyse the shock profile…
Optical downconversion is widely used for generating photon pairs, squeezed and entangled states of light, making it an indispensable tool in quantum optics and quantum information. In the regime where the pump is much stronger than the…
A prototype of a single-gap glass Resistive Plate Chamber (RPC) is constructed by the authors. To find the considerations required for better operation of the detector's gas system, we have simulated the flow of the Ar gas through the…
We present a flow tube reactor design for gas-phase kinetics studies near ambient temperature and pressure. Built entirely from standard tubing, the setup simplifies conventional flow tube configurations based on injector translation while…
Continuum Monte-Carlo simulations at constant pressure are performed on short chain molecules at surfaces. The rodlike chains, consisting of seven effective monomers, are attached at one end to a flat twodimensional substrate. It is found…
Upper limits on the shock speeds in supernova remnants can be combined with post-shock temperatures to obtain upper limits on the ratio of cosmic ray to gas pressure (P_CR / P_G) behind the shocks. We constrain shock speeds from proper…
Mammography is currently the primary imaging modality for breast cancer screening and plays an important role in cancer diagnostics. A standard mammographic image acquisition always includes the compression of the breast prior x-ray…
The aim of this work is to study heat pump cycles, using CO 2 based mixtures as working fluids. Since adding other chemicals to CO 2 moves the critical point and generally equilibrium lines, it is expected that lower operating pressures as…
Langmuir probe techniques have been used to study time and spatially resolved electron densities and electron temperatures in pulse-modulated hydrogen discharges in two different planar microwave reactors (fmicrowave= 2.45 GHz, tpulse= 1…
We report on the design and characterization of an antiproton deceleration beamline, based on a pulsed drift tube, for the PUMA experiment at the Antimatter Factory at CERN. The design has been tailored to high-voltage (100 kV) and…
Extensive investigations have been and are being carried out on a stiff clay from an underground research laboratory located at Mol (Belgium) called Boom clay, in the context of research into deep nuclear waste disposal. Suction effects in…
In nuclear and atomic physics experiments, charged ion beams often need to be guided from the ion production to the experimental site. In the PUMA experiment, an ion source beamline was developed, which can be operated with up to…
Direct-drive is an important approach to achieving the ignition of inertial confinement fusion. To enhance implosion performance while keeping the risk of hydrodynamic instability at a low level, we have designed a procedure to optimize the…
We demonstrate operation of a constant-pressure flowmeter capable of generating and accurately measuring flows as low as $2\times10^{-13}$ mol/s. Generation of such small flows is accomplished by using a small conductance element with…