Related papers: Lead Iodide Perovskite Light-Emitting Field-Effect…
Investigation of the inherent field-driven charge transport behaviour of 3D lead halide perovskites has largely remained a challenging task, owing primarily to undesirable ionic migration effects near room temperature. In addition, the…
Lead-halide perovskites emerged as novel semiconducting materials suitable for a variety of optoelectronic applications. However, fabrication of reliable perovskite field-effect transistors (FETs), the devices necessary for the fundamental…
Organic-inorganic hybrid perovskites such as methylammonium lead iodide (CH3NH3PbI3) are game-changing semiconductors for solar cells and light-emitting devices owing to their exceptionally long carrier lifetime and diffusion length.…
The high performance of hybrid perovskite based devices is attributed to its excellent bulk-transport properties. However, carrier dynamics, especially at the metal-perovskite interface, and its influence on device operation are not widely…
An n-channel accumulation-type field effect transistor (FET) has been fabricated utilizing a KTaO3 single crystal as an active element and a sputtered amorphous Al2O3 film as a gate insulator. The device demonstrated an ON/OFF ratio of 10^4…
Methylammonium lead iodide perovskite has revolutionized the field of third generation solid-state solar cells leading to simple solar cell structures1 and certified efficiencies up to 20.1%. Recently the peculiar light harvesting…
Perovskite-based optoelectronic devices have shown great promise for solar conversion and other optoelectronic applications, but their long-term performance instability is regarded as a major obstacle to their widespread deployment.…
Organic-inorganic metal halide perovskite devices have generated significant interest for LED, photodetector, and solar cell applications due to their attractive optoelectronic properties and substrate-choice flexibility1-4. These devices…
Defect engineering is applied to hybrid (CH$_3$NH$_3$)PbI$_3$ organic-inorganic perovskites. These materials have become one of the most promising low-cost alternatives to traditional semiconductors in the field of photovoltaics and light…
Great success has been achieved in improving the photovoltaic energy conversion efficiency of the organic-inorganic perovskite-based solar cells, but with very limited knowledge on the thermal transport in hybrid perovskites, which would…
A field-effect transistor that employs a perovskite-type SrTiO3 single crystal as the semiconducting channel is revealed to function as n-type accumulation-mode device with characteristics similar to that of organic FET's. The device was…
Methylammonium lead triiodide perovskite (MAPbI3) semiconductor displays outstanding photovoltaic and light emitting properties. We address the unique behavior in which a bias voltage can be used to switch on and off the luminescence of a…
We report on the temperature dependence of thermal conductivity of single crystalline and polycrystalline organometallic perovskite CH3NH3PbI3. The comparable absolute values and temperature dependence of the two sample's morphologies…
The spin degree of freedom of charge carriers in halide-perovskite semiconductors can be highly useful for information photonics applications. The Faraday effect is known to be the best indicator of paramagnetism of the material and of the…
Lead-halide perovskites are promising materials for opto-electronic applications. Recent reports indicated that their mechanical and electronic properties are strongly affected by the lattice vibrations. Herein we report far-infrared…
Owing to their exceptional semiconducting properties, hybrid inorganic-organic perovskites show great promise as photovoltaic absorbers. In these materials, long-range diffusion of charge carriers allows for most of the photogenerated…
Organic-inorganic lead halide perovskites containing a mixture of iodide and bromide anions consistently perform better in donor-acceptor heterojunction solar cells than the standard methylammonium lead triiodide material. This observation…
An ab-initio calculation in the framework of DFT, as implemented in the FHI-aims package within GGA with the pbe parameterization was carried out in this work. Although methyl ammonium lead iodide, (CH3NH3PbI3) has proven to be an effective…
Unbalanced mobility and injection of charge carriers in metal-halide perovskite light-emitting devices pose severe limitations to the efficiency and response time of the electroluminescence. Modulation of gate bias in methylammonium lead…
Perovskite light-emitting field-effect transistors (PeLEFETs) provide a versatile device architecture to control transport and electroluminescence properties of hybrid perovskites, enabling injection of high charge carrier density and…