Related papers: 3D Printing of Scintillating Materials
In recent years, demand for scintillation detectors with high time resolution (better than 100 ps) has emerged in high-energy physics and medical imaging applications. In particular, time of flight positron emission tomography (TOF-PET) can…
A powerful and flexible method of 3D nano-printing, based on focusing charged aerosol, has been developed. The self-consistent electric field configuration, created with a holey floating mask and used as the scaffold for printing…
We demonstrate three-dimensional (3-D) nanoimprint lithography using master samples initially structured by two-photon lithography. Complex geometries like micro prisms, micro parabolic concentrators, micro lenses and other micrometer sized…
We report the first observation of a superconducting transition in a 3D printed, metallised-plastic device. A cylindrical cavity is 3D printed from a photosensitive polymer resin and then a 20 $\mu$m layer of tin deposited. A resonant TE…
SuperFGD, a highly granular scintillator detector, is under construction to reduce systematic uncertainties in the T2K experiment in order to improve the sensitivity to CP-violation in neutrino oscillations. SuperFGD will be comprised of…
Fast timing detectors are an essential element in the experimental setup for time-of-flight (ToF) mass measurements of unstable nuclei. We have upgraded the scintillator detectors used in experiments at the National Superconducting…
Mass production of augmented reality (AR) waveguides has been challenging due to the intricate nature of the fabrication technique and the high precision required for its optical characteristics. In this paper, we have presented a novel and…
We describe technologies which can be developed to produce large area, low cost pixelated tracking detec- tors. These utilize wafer-scale 3D electronics and sensor technologies currently being developed in industry. This can result in fully…
Manufacturing electronic devices by printing techniques with low temperature sintering of nano-size material particles can revolutionize the electronics industry in coming years. The impact of this change to the industry can be significant…
Results of experimental studies of detector arrays S-PD (scintillator-photodiode) and PRD (scintillator-photoreceiving device) used for X-ray digital radiography have shown that there exist further possibilities to increase spatial…
Scintillating ceramics are a promising, new development for various applications in science and industry. Their application in calorimetry for particle physics experiments is expected to involve an exposure to high levels of ionizing…
The continued adoption of Additive Manufacturing technologies is raising concerns in the security, forensics, and intelligence gathering communities. These concerns range from identifying and mitigating compromised devices, to theft of…
In this paper we report on the 3D printing and testing of the piezoelectric polymer polyvinylidene difluoride (PVDF). Samples of PVDF were fabricated using a fused deposition modeling (FDM) 3D printer and then activated using a corona…
Extrusion based 3D Printing (E3DP) is an Additive Manufacturing (AM) technique that extrudes thermoplastic polymer in order to build up components using a layerwise approach. Hereby, AM typically requires long production times in comparison…
For a long time, scintillator detectors have suffered from relatively weak spatial resolution due to various influencing factors. Additionally, the high cost of photomultiplier tubes (PMTs) has limited the widespread adoption of…
With the rapid rise of 3D-printing as a competitive mass manufacturing method, manual "decaking" - i.e. removing the residual powder that sticks to a 3D-printed part - has become a significant bottleneck. Here, we introduce, for the first…
Scintillators are widely used in radiation detection, with continuous advancements enhancing their performance and developing new materials. This study presents a custom experimental setup for the characterization of crystal scintillators…
In recent years, the field of radiation detection has witnessed a paradigm shift with the emergence of plastic scintillators incorporating perovskite nanocrystals (PNCs). This innovative class of scintillators not only capitalizes on the…
The discovery of scintillation in the blue regime from polyethylene naphthalate (PEN), a commonly used high-performance industrial polyester plastic, has sparked considerable interest from the physics community as a new type of plastic…
The reconstruction of particle trajectories makes it possible to distinguish between different types of charged particles. In high-energy physics, where trajectories are rather long, large size trackers must be used to achieve sufficient…