Related papers: A new inner drift chamber for BESIII MDC

The ALICE (A Large Ion Collider Experiment) Time Projection Chamber (TPC) at CERN LHC is presently equipped with Multi Wire Proportional Chambers (MWPCs). A gating grid prevents ions produced during the gas amplification from moving into…

A new prototype of STAR inner Time Projection Chamber (iTPC) MWPC sector has been fabricated and tested in an X-ray test system. The wire chamber built at Shandong University has a wire tension precision better than 6$\%$ and wire pitch…

To keep the hardware costs of future communications systems manageable, the use of low-cost hardware components is desirable. This is particularly true for the emerging massive multiple-input multiple-output (MIMO) systems which equip base…

After the Long Shutdown 2 the LHC will provide lead-lead collisions at interaction rates as high as 50kz. In order to cope with such conditions the ALICE Time Projection Chamber (TPC) needs to be upgraded. After the upgrade the TPC will run…

Monolithic 3D integration has become a promising solution for future computing needs. The metal inter-layer via (MIV) forms interconnects between substrate layers in Monolithic 3D integration. Despite small size of MIV, the area overhead…

We present the most recent results from the BESIII experiment. This review covers the studies of charmonium decays, light hadron spectroscopy and charm physics. Especially, the prospects for weak decays of charm mesons are addressed at the…

Since the end of Run 1 of the LHC in 2012, the outermost ring has been added to the CMS Cathode Strip Chambers (CSC) endcap muon detector, and the readout electronics of the innermost ring of CSCs have been upgraded to accommodate the…

Battery swapping as a business model for battery energy storage (BES) has great potential in future integrated low-carbon energy and transportation systems. However, frequent battery swapping will inevitably accelerate battery degradation…

This paper reports on the design and construction of a chamber for the muon identifier detector (MID) of the ALICE 3 upgrade project. The chamber consists of two sensitive layers separated by a 1 cm air gap. Each layer holds 24 scintillator…

A Resistive Plate Chamber using Diamond-Like Carbon electrodes (DLC-RPC) has been developed as a background tagging detector in the MEG$~$II experiment. The DLC-RPC is planned to be installed in a high-intensity and low-momentum muon beam.…

Operating HADES at the future FAIR SIS-100 accelerator challenges the rate capability of DAQ and electronics. A new, more robust version of front-end electronics needs to be built for the HADES drift chamber system. Due to the…

Consequences of the interference between external and internal spectator amplitudes for the lifetimes and semileptonic decay fractions of $B^0$ and $B^+$ mesons are discussed. Extrapolating from the constructive interference observed in 11…

In this paper, we investigate the impact of channel aging on the performance of cell-free (CF) massive multiple-input multiple-output (MIMO) systems with both spatial correlation and pilot contamination. We derive novel closed-form uplink…

Large detectors are often monitored at the channel level (drift time, collected charge, and hit maps), which validates hardware but not tracking performance. A wire-by-wire tracking efficiency diagnostic is presented for the Belle~II…

Recent experiments at SLAC [1,2] and CERN [3] have revealed evidence of significant deformation in the form of "pitting" of the cells of the 1.8m series of structures DDS/RDDS (Damped Detuned Structure/Rounded Damped Detuned Structure).…

The Status of BEPCII/BESIII upgrade is described, BEPCII is designed to reach a luminosity of $10^{33}/cm^{-2}s^{-1}$ at c. m. energy of 3.89GeV, and BESIII detector is fully rebuilt. The project is on track and is progressing well. The…

Charm hadronic decays are an important tool for understanding the the hadron spectroscopy and dynamics of the strong interaction in the low energy regime. BESIII experiment has collected a huge amount of data at various energy points around…

A new type of resistive plate chamber (RPC) is under development using thin-film resistive electrodes based on diamond-like carbon (DLC). Planned to be put on the path of high-intensity low-momentum muon beam of the MEG II experiment, this…

Monolithic 3D (M3D) technology enables high density integration, performance, and energy-efficiency by sequentially stacking tiers on top of each other. M3D-based network-on-chip (NoC) architectures can exploit these benefits by adopting…

Creating a single bandgap solar cell that approaches the Shockley-Queisser limit requires a highly reflective rear mirror. This mirror enhances the voltage of the solar cell by providing photons with multiple opportunities for escaping out…