Related papers: Multi-layer Ti-based Coating Obtained by Arc PVD M…
Magnetron sputtered titanium nitride (TiN) thin films are widely used as protective coatings due to their high hardness, but suffer from inherent brittleness and low fracture toughness, limiting their applicability. The multilayering of TiN…
Silver is a metal which provides the highest reflectivity in the very broad wavelength range as well as the lowest polarization splitting. However, it is not very stable chemically and silver mirrors are easily damaged in a corrosive or…
We report on multilayer high efficiency antireflection coating (ARC) design and development for use at UV wavelengths on CCDs and other Si-based detectors. We have previously demonstrated a set of single-layer coatings, which achieve >50%…
This paper reports on formation of high aspect micro patterns on low temperature co-fired ceramic (LTCC) substrates by integrating micro inkjetting with electroless plating. Micro inkjetting was realized by using an inkjetting printer that…
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition…
Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at…
It is well known that the alignment of liquid crystals can be realized by rubbing or photoalignment technologies. Recently nonlinear laser lithography was introduced as a fast, relatively low-cost method for large area nano-grating…
Plasma electrolytic oxidation (PEO) is a process for obtaining oxide coatings on valve metals. Mostly PEO is done in an aqueous solution electrolyte which limits the size of treated parts due to the system heating up. In presented work an…
A tunneling spectroscopy study is presented of superconducting MoN and Nb$_{0.8}$Ti$_{0.2}$N thin films grown by atomic layer deposition (ALD). The films exhibited a superconducting gap of 2meV and 2.4meV respectively with a corresponding…
The deposition of boron-doped amorphous carbon thin films on SiO2 substrate was achieved via a focused ion beam-assisted chemical vapor deposition of triphenyl borane (C18H15B) and triphenyl borate (C18H15BO3). The existence of boron in the…
The transparent and conductive properties of indium tin oxide (ITO) thin films, make them an attractive coating for optically integrated ion traps. However, the relatively low transmittance for wavelengths $<$ 400 nm, high scattering and…
The effects of ion beam induced atomic mixing and subsequent thermal treatment in Si/C multilayer structures are investigated by use of the technique of grazing incidence X-ray diffraction (GIXRD) and Raman spectroscopy. The [Si (3.0 nm) /…
We describe the use of laser-enhanced etching of fused silica in order to build multi-layer ion traps. This technique offers high precision of both machining and alignment of adjacent wafers. As examples of designs taking advantage of this…
In this work, we explore the ability of plasma assisted chemical vapor deposition (PACVD) operating under high power densities to produce thin high-quality diamond layers with a controlled doping with negatively-charged nitrogen-vacancy…
The microstructural development in H13 tool steel upon nitriding by an ion beam process was investigated. The nitriding experiments were performed at a relatively low temperature of about 400\deg C and at constant ion beam energy (400 eV)…
Microwave sheath-Voltage combination Plasma (MVP) is a high density plasma source and can be used as a suitable plasma processing device (e.g., ionized physical vapor deposition). In the present report, the temporal behavior of an argon MVP…
Nanopores (NPs) grown by anodizing can be partially hidden beneath a relatively compact surface oxide layer, which limits the volumetric surface area of these nanostructures. In this work, nitinol (NiTi) alloy was anodized in an electrolyte…
This paper presents the findings of the synthesis of multicomponent (Al, W, Ni, Ti, Nb) alloy coatings from mosaic targets. For the study, a pulsed magnetron sputtering method was employed under different plasma generation conditions:…
The experimental research on the nature of diffusion by the Mo substrate atoms into the Ti and Cr deposited thin films is completed by the secondary ion-ion emission method. In [1], the initial stage of the Ti thin film on the Mo substrate…
The surface hydrophobicity of poly($\epsilon$-caprolactone) electrospun scaffolds prevents their interactions with cells and tissue integration. Plasma treatment of the scaffolds enhances their hydrophilicity. However, the hydrophobicity of…