Related papers: Doped Polyaniline: A Possible Anode for Organic El…
The need to reduce the environmental impact of inorganic electronic systems is pressing. Although the field of organic electronics provides a potential solution to this issue, research and optimization is still majorly carried out on glass…
The ability to reversibly and site-selectively tune ambipolar doping in a single semiconductor is crucial for reconfigurable electronics beyond silicon, but remains highly challenging. Here, we present a rewritable architecture based on…
The p-type surface conductivity of H-terminated diamond (HD, H-diamond) has created new path ways for developing diamond based electronic devices as well as chemical and bio-sensors. However, the hydrophobic nature of the HD surface can…
Most materials recently developed for room temperature phosphorescence (RTP) lack of practical relevance due to their inconvenient crystalline morphology. Using amorphous material systems instead, programmable luminescent tags (PLTs) based…
Lanthanum manganite, LaMnO (LMO) is the parent compound for a class of hole doped(e.g. La1-xCaxMnO3, La1-xSrxMnO3) and electron doped (e.g. . La1-xCexMnO3, La1-xSnxMnO3) perovskite complex oxide materials. Strong correlation between the…
Polyaniline and graphene nanoplatelets (PANI-GNP) nanocomposites are synthesized by in situ oxidative polymerization of polyaniline using an oxidizing agent, ammonium peroxy disulphate (APS). The mass of GNP in the nanocomposites varied by…
This work presents for the first time a flexible over-moded resonator (OMR) based on P(VDF-TrFE) thin films. The devices were manufactured on commercially available elastic substrate with inkjet-printed electrodes. The sensing copolymer…
Active control over the flow of heat in the near-field holds promise for nanoscale thermal management, with applications in refrigeration, thermophotovoltaics, and thermal circuitry. Analogously to its electronic counterpart, the…
Emitting dipole orientation (EDO) is an important issue of emitting materials in organic light-emitting diodes (OLEDs) for an increase of outcoupling efficiency of light. The origin of preferred orientation of emitting dipole of spherically…
Boron nitride is a promising material for nanotechnology applications due to its two-dimensional graphene-like, insulating, and highly-resistant structure. Recently it has received a lot of attention as a substrate to grow and isolate…
Junctionless Nanowire Field-Effect Transistors (JNFETs), where the channel region is uniformly doped without the need for source-channel and drain-channel junctions or lateral doping abruptness, are considered an attractive alternative to…
We have used an electro-optic technique to measure the position-dependent infrared absorption of holes injected into a thin crystal of the organic semiconductor, 6,13-bis(triisopropylsilylethynyl)-pentacene incorporated in a field-effect…
An ultracompact thin-film polarizer for normal-incidence (0{\deg} angle of incidence, AOI) applications is analytically and experimentally investigated. The device is based on Fano resonances in periodically nanostructured dielectric thin…
Inspired by the striking similarities between the metal-insulator transitions in graphite and Si-MOSFET's and the recent attention to charge doping in carbon-based materials, we have made attempts to fabricate a field-effect transistor…
Silicon-based dielectric is crucial for many superconducting devices, including high-frequency transmission lines, filters, and resonators. Defects and contaminants in the amorphous dielectric and at the interfaces between the dielectric…
We demonstrate enhanced light extraction for monochrome top-emitting organic light-emitting diodes (OLEDs). The enhancement by a factor of 1.2 compared to a reference sample is caused by the use of a hole transport layer (HTL) material…
The performance of solution-processed organic light emitting diodes (OLEDs) is often limited by non-uniform contacts. In this work, we introduce Ni-containing solution-processed metal oxide (MO) interfacial layers inserted between indium…
Optical Tamm States (OTS) are confined optical modes that can occur at the interface between two highly reflective structures. However, due to the strong reflectance required, their implemen-tation with highly processable and metal-free…
Oxygen plasma is a widely used treatment to change the surface properties of organic layers. This treatment is particularly interesting to enable the deposition from solution of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)…
Microwave-to-optical transduction of single photons will play an essential role in interconnecting future superconducting quantum devices, with applications in distributed quantum computing and secure communications. Various transducers…