Related papers: Comparison between Atomic Force Microscopy and For…
Atomic force microscopy (AFM) has been constantly supporting nanosciences and nanotechnologies for over 30 years, being present in many fields from condensed matter physics to biology. It enables measuring very weak forces at the nanoscale,…
Metrological AFM measurements are performed on the silica glass interfaces of photonic band-gap fibres and hollow capillaries. The freezing of attenuated out-of-equilibrium capillary waves during the drawing process is shown to result in a…
We propose a two-frequency driving scheme in dynamic atomic force microscopy that maximizes the interaction time between tip and sample. Using a stochastic description of the cantilever dynamics, we predict large classical squeezing and a…
We demonstrate the measurement of laterally induced optical forces using an Atomic Force Microscope (AFM). The lateral electric field distribution between a gold coated AFM probe and a nano-aperture in a gold film is mapped by measuring the…
In this article, we present a deflection measurement setup for Atomic Force Microscopy (AFM). It is based on a quadrature phase differential interferometer: we measure the optical path difference between a laser beam reflecting above the…
Atomic force microscope (AFM) generally works on the basis of manipulating absolute magnitude of van der Waals (vdW) force between the tip and specimen. The force is, however, less sensitive to alternation of atom species than to tip-sample…
Frequency dependent dynamic behavior in Piezoresponse Force Microscopy (PFM) implemented on a beam-deflection atomic force microscope (AFM) is analyzed using a combination of modeling and experimental measurements. The PFM signal comprises…
Atomic force microscopy (AFM) is a mechanical profiling technique that allows to image surfaces with atomic resolution. Recent progress in reducing the noise of this technique has led to a resolution level where previously undetectable…
Motion of cantilever near sample surfaces exhibits additional friction even before two bodies come into mechanical contact. Called non-contact friction (NCF), this friction is of great practical importance to the ultrasensitive force…
Tapping mode atomic force microscopy is a standard technique for inspection and analysis at the nanometer scale. The understanding of the non-linear dynamics of the system due to the tip sample interaction is an important prerequisite for a…
A simulation of an atomic force microscope operating in the constant amplitude dynamic mode is described. The implementation mimics the electronics of a real setup including a digital phase-locked loop (PLL). The PLL is not only used as a…
Frequency-modulation atomic force microscopy provides an outstanding precision of the measurement of chemical bonding forces. However, as the cantilever oscillates with an amplitude A that is usually on the order of atomic dimensions or…
We present imaging and force spectroscopy measurements of DNA molecules adsorbed on functionalized mica. By means of Non-Contact mode AFM (NC-AFM) in Ultra High Vacuum (UHV), the frequency shift (\Delta f) versus separation (z) curves were…
Small-amplitude dynamic atomic force microscopy (dynamic-AFM) in a simple nonpolar liquid was studied through molecular dynamics simulations. We find that within linear dynamics regime, the contact stiffness and damping of the confined film…
A new method is introduced for calibrating lateral force as measured by an atomic force microscope (AFM), making use of both an interferometric detector and an optical beam detector on the same instrument. The method may be implemented…
The functionalization of an Atomic Force Microscope (AFM) cantilever with a colloidal bead is a widely used technique when the geometry between the probe and the sample must be controlled, particularly in force spectroscopy. But some…
The distance dependence and atomic-scale contrast observed in nominal contact potential difference (CPD) signals recorded by KPFM on surfaces of insulating and semiconducting samples, have stimulated theoretical attempts to explain such…
We demonstrate a method to accurately control the distance between a custom probe and a sample on a {\mu}m to nm scale. The method relies on the closed-loop feedback on the angular deflection of an in-contact AFM microcantilever. High…
A method to measure the viscosity of liquids at microscales is presented. It uses a thin glass fiber fixed on the tip of the cantilever of an extremely low noise Atomic Force Microscope (AFM), which accurately measures the cantilever…
We investigate the capillary force that applies on a tilted cylinder as a function of its dipping angle i, using a home-built tilting Atomic Force Microscope (AFM) with custom made probes. A micrometric-size rod is glued at the end of an…