Related papers: Features of charge transport in Mo/n-Si structures…
In this paper, the electrical behavior of tungsten carbide (WC) Schottky barrier on 4H-SiC was investigated. First, a statistical current-voltage (I-V) analysis in forward bias, performed on a set of equivalent diodes, showed a symmetric…
Realizing an optimal Schottky interface of graphene on Si is challenging, as the electrical transport strongly depends on the graphene quality and the fabrication processes. Such interfaces are of increasing research interest for…
Graphene interfaced with a semiconductor forms a Schottky junction with rectifying properties, however, fluctuations in the Schottky barrier height are often observed. In this work, Schottky junctions are fabricated by transferring chemical…
Schottky barrier height and the ideality factor $\eta$ are established for the first time in the single phase (Ga,Mn)N using a vertical geometry device. The material has been heteroepitaxially grown on commercially available low threading…
Schottky barrier contact has been fabricated by thermal deposition of Al on (100) Ge (impurity concentration~1010/cm3 at 80K) that shows extrinsic p-type to intrinsic n-type transition near 180K. Both p and n-type Ge exhibits ideal Schottky…
In this paper, the Ni Schottky barrier on GaN epilayer grown on free standing substrates has been characterized. First, transmission electrical microscopy (TEM) images and nanoscale electrical analysis by conductive atomic force microscopy…
A comprehensive current-voltage (I-V) characterization is performed for three different Schottky contacts; Pt, Ni and Ti, to unintentionally doped (UID) \{beta}-(Al0.19Ga0.81)2O3 grown by molecular beam epitaxy (MBE) on \{beta}-Ga2O3 for…
Schottky barriers are often formed at the semiconductor/metal contacts and affect the electrical behaviour of semiconductor devices. In particular, Schottky barriers have been playing a major role in the investigation of the electrical…
The Schottky barrier of a metal-semiconductor junction is one of the key quantities affecting the charge transport in a transistor. The Schottky barrier height depends on several factors, such as work function difference, local atomic…
The thermal stability of most electronic and photo-electronic devices strongly depends on the relationship between Schottky Barrier Height (SBH) and temperature. In this paper, the possible of thermionic current depicted via correct and…
Ga2O3 Schottky barrier diodes featuring a field plate and a composite SiO2/SiNx dielectric layer beneath the field plate were fabricated, achieving a breakdown voltage of 2.4 kV at room temperature. Electrical performance and degradation…
The electrical behavior of Ni Schottky barrier formed onto heavily doped (ND>1019 cm-3) n-type phosphorous implanted silicon carbide (4H-SiC) was investigated, with a focus on the current transport mechanisms in both forward and reverse…
The low temperature electrical behavior of adjacent silicide/Si Schottky contacts with or without dopant segregation is investigated. The electrical characteristics are very well modeled by thermionic-field emission for non-segregated…
An aluminum nitride (AlN) Schottky barrier diode (SBD) was fabricated on a nonpolar AlN crystal grown on tungsten substrate by physical vapor transport. The Ni/Au-AlN SBD features a low ideality factor n of 3.3 and an effective Schottky…
In this paper, we investigate the electrical evolution of tungsten (W) and tungsten carbide (WC) Schottky contacts on 4H-SiC subjected to thermal treatments at different annealing temperatures from 475 to 700 {\deg} C. For each annealing…
We show the operation of a Cu/Al_2O_3/Cu/n-Si hot-electron transistor for the straightforward determination of a metal/semiconductor energy barrier height even at temperatures below carrier-freeze out in the semiconductor. The hot-electron…
We report on the fabrication and temperature-dependent characterization of MOCVD-grown quasi-vertical AlN Schottky barrier diodes (SBDs) on bulk AlN substrates. The SBDs exhibited high current densities exceeding 2 kA/cm2 at 10 V, with a…
Detail transport properties of graphene/MoS2/metal vertical heterostructure have been investigated. The van der Waals interface between the graphene and MoS2 exhibits Schottky barrier. The application of gate voltage to the graphene layer…
The newly emerging class of atomically-thin materials has shown a high potential for the realisation of novel electronic and optoelectronic components. Amongst this family, semiconducting transition metal dichalcogenides (TMDCs) are of…
The evolution of the Schottky barrier height (SBH) of Er silicide contacts to n-Si is investigated as a function of the annealing temperature. The SBH is found to drop substantially from 0.43 eV for the as-deposited sample to reach 0.28 eV,…