Related papers: Wide Stiffness Range Cavity Optomechanical Sensors…
The description of hydrodynamic interactions between a particle and the surrounding liquid, down to the nanometer scale, is of primary importance since confined liquids are ubiquitous in many natural and technological situations. In this…
Measurements of the deflection induced by thermal noise have been performed on a rectangular atomic force microscope cantilever in air. The detection method, based on polarization interferometry, can achieve a resolution of 1E-14 m/rtHz in…
Since the inception of the atomic force microscope AFM, dynamic methods have been very fruitful by establishing methods to quantify dissipative and conservative forces in the nanoscale and by providing a means to apply gentle forces to the…
We present here the design of a sensitive Compact Faraday-modulator (CFM) based optical magnetometer for imaging the distribution of weak local magnetic fields inside hysteretic magnetic materials. The system developed has a root mean…
Palpation of human tissue during Minimally Invasive Surgery is hampered due to restricted access. In this extended abstract, we present a variable stiffness and dynamic force range sensor that has the potential to address this challenge.…
Atomic force microscopy (AFM) is one of the most promising methods for investigating the structure of materials at the micro and nanoscale levels, as well as their local physical-mechanical properties. The experimental data obtained with…
In this paper, a novel coarse-to-fine optical MEMS accelerometer based on the Fabry Perot (FP) interferometer is proposed. The mechanical structure consists of a proof mass that is suspended by four L-shaped springs. The deflection of the…
Aligning a microcantilever to an area of interest on a sample is a critical step in many scanning probe microscopy experiments, particularly those carried out on devices and rare, precious samples. We report a series of protocols that…
Using Coarse-Grained Molecular Dynamics simulations, we study the relaxation of bilayer vesicles, uniaxially compressed by an Atomic Force Microscope (AFM) cantilever. The relaxation time exhibits a strong force-dependence.…
Recent advances in mechanical-diode based ultrasonic force microscopy techniques are reviewed. The potential of Ultrasonic Force Microscopy (UFM) for the study of material elastic properties is explained in detail. Advantages of the…
Force sensors are at the heart of different technologies such as atomic force microscopy or inertial sensing \cite{RMPforce2003, Rugar2004, YazdiIEEE}. These sensors often rely on the measurement of the displacement amplitude of mechanical…
Amplitude-modulation atomic force microscopy enables observation of fragile molecules at the nanometer scale. To shorten measurement times and capture dynamic molecules, increasing the frame rate is essential. Traditionally, maximum frame…
Heat transport in low-dimensional solids can significantly differ from their bulk counterpart due to various size-related effects. This offers rich heat transport phenomena to emerge. However, finding an appropriate thermometry method for…
Structural and mechanical differences between cancerous and healthy tissue give rise to variations in macroscopic properties such as visual appearance and elastic modulus that show promise as signatures for early cancer detection. Atomic…
We report on the development of a sensitive dilatometer based upon a AFM piezocantilever. This dilatometer has been tested at temperatures down to 25 mK and in magnetic fields up to 16 T. The layered heavy fermion superconductor $CeCoIn_5$…
We measure the mechanical thermal noise of soft silicon atomic force microscopy cantilevers. Using an interferometric setup, we have a resolution down to 1E-14 m/rtHz on a wide spectral range (3 Hz to 1E5 Hz). The low frequency behavior…
Active microelectromechanical systems can couple the nanomechanical domain with the electronic domain by integrating electronic sensing and actuation mechanisms into the micromechanical device. This enables very fast and sensitive…
Levitated optomechanics is showing potential for precise force measurements. Here, we report a case study, to show experimentally the capacity of such a force sensor. Using an electric field as a tool to detect a Coulomb force applied onto…
In this work is presented a microbalance for single microparticle sensing based on resonating AFM cantilever. The variation of the resonator eigenfrequency is related to the particle mass positioned at the free apex of the cantilever. An…
Atomic force microscopy (AFM) using qPlus sensors is a powerful tool for high-resolution analysis in various liquids, including high-viscosity or opaque environments. However, the relatively high displacement sensor noise density (n_{ds}),…