Related papers: Residual Strain Dependence on Matrix Structure in …
The article presents a mapping of the residual strain along the axis of InAs/InSb heterostructured nanowires. Using confocal Raman measurements, we observe a gradual shift in the TO phonon mode along the axis of these nanowires. We…
Using calculations from first principles based on density functional theory we have studied the strain sensitivity of the high-field superconducting magnet A15 Nb3Sn. The Nb3Sn lattice cell was deformed in the same way as observed…
To study the size and strain rate dependency of copper polycrystalline microstructures, a multi-layered copper/Al$_2$O$_3$ thin film was deposited on a Si substrate using a hybrid deposition system (combining physical vapour and atomic…
A comparative study of magnetic behavior in a DC magnetic field up to 19 Tesla has been undertaken on different Nb3Sn samples, i.e. single crystals, polycrystal samples and multifilamentary wires. From the 1st and 3rd harmonics of the AC…
In modeling the properties of superconducting multi-filamentary strands, the filament twist pitch and the inter-filament transverse resistivity play a crucial role in the definition of the current transfer length. This affects the AC losses…
Strain engineering is a powerful tool for tuning the electronic, magnetic, and topological properties of two-dimensional (2D) materials and thin films - particularly at high values of strain (>3%) where many electronic, magnetic, and…
We report on quantification and elastic strain mapping in two artificial BaZrO3/BaTiO3 (BZ/BT) superlattices having periods of 6.6 nm and 11 nm respectively, grown on (001) SrTiO3 single crystal substrate by pulsed laser deposition…
This article gives an overview of the available literature on simplified, well defined (quasi-)homogeneous laboratory samples. After more than 50 years of research on superconductivity in Nb3Sn, a significant amount of results are…
Grain growth is a key process in the thermomechanical treatment of metals. Recently, the presence of local residual stresses within fully recrystallized grains has attracted increasing interest in connection with shear-coupled grain…
We have examined the upper critical field of a large and representative set of present multi-filamentary Nb3Sn wires and one bulk sample over a temperature range from 1.4 K up to the zero field critical temperature. Since all present wires…
Micro-Laue diffraction and simultaneous rainbow-filtered micro-diffraction were used to measure accurately the full strain tensor and the lattice orientation distribution at the sub-micron scale in highly strained, suspended Ge…
First-principles density functional calculations are performed to investigate the interplay between inplane strains and interface effects in 1by1 PbTiO3/SrTiO3 and BaTiO3/SrTiO3 superlattices of tetragonal symmetry. One particular emphasis…
Dynamically compressed materials in longitudinal waves are described by two physical models: hydrostatic pressure, with equal, normal, principal stresses or material uniaxially strained in the wave propagation direction. These models are…
A combined analysis of x-ray absorption and resonant reflectivity data was used to obtain the orbital polarization profiles of superlattices composed of four-unit-cell-thick layers of metallic LaNiO3 and layers of insulating RXO3 (R=La, Gd,…
In modern Nb3Sn wires there is a fundamental compromise to be made between optimizing the intrinsic properties associated with the superfluid density in the A15 phase (e.g. Tc, Hc, Hc2, all of which are composition dependent), maximizing…
Compact, high-performance components in millimeter-wave (mmWave) communication systems demand new acoustic filter technology at increasingly higher frequencies. Among various promising mmWave platforms, first-order antisymmetric (A1) mode…
In this article for the first time we applied the eclipse Z-scan technique which is by one order of magnitude more sensitive than the conventional Z-scan technique to measure LiNbO3 crystal nonlinear refractive index in the THz range. The…
During Rutherford cable production the wires are plastically deformed and their initially round shape is distorted. Using X-ray absorption tomography we have determined the 3D shape of an unreacted Nb3Sn 11 T dipole Rutherford cable, and of…
Strain heterogeneity at the microstructural level plays a vital role in the deformation and fracture behaviour of dual or multi-phase materials. In the present work, the strain heterogeneity, localization and partitioning arising at the…
Neutron diffraction and muon spin relaxation ($\mu$SR) studies are presented for the newly characterized polymorph of NiNb$_2$O$_6$ ($\beta$-NiNb$_2$O$_6$) with space group P4$_2$/n and $\mu$SR data only for the previously known columbite…