Related papers: The UA9 experimental layout
The LHC beam dumps are responsible for the safe absorption of the Large Hadron Collider (LHC) particle beams. In 2018, the two 6.4-tonne beam dumps that had been in operation since the LHC's startup in 2008 were removed and replaced with…
Mainly due to their outstanding performance the position sensitive silicon detectors are widely used in the tracking systems of High Energy Physics experiments such as the ALICE, ATLAS, CMS and LHCb at LHC, the world's largest particle…
For its physics program with a high-intensity hadron beam of up to 2e7 particles/s, the COMPASS experiment at CERN requires tracking of charged particles scattered by very small angles with respect to the incident beam direction. While good…
Integrated optics are used to achieve astronomical interferometry inside robust and compact materials, improving the instrument's stability and sensitivity. In order to perform differential phase measurements at the H$\alpha$ line (656.3…
SHIP is a new general purpose fixed target facility, proposed at the CERN SPS accelerator. In five years, $2\times 10^{20}$ protons of 400 GeV/c momentum will be dumped on a Molybdenum target. A detector downstream of the target will allow…
Ultracold neutron (UCN) detectors using two visually very similar, to the microscopic level, pieces of optically contacted Cerium doped lithium glasses have been proposed for high rate UCN experiments. The chief difference between the two…
A series of Silicon crystal undulator samples were produced based on the approach presented in PRL 90 (2003) 034801, with the periods of undulation from 0.1 mm to 1 mm, and the number of periods on the order of 10. The samples were…
Balloon-borne astronomy offers an attractive option for experiments that require precise pointing and attitude stabilization, due to a large reduction in the atmospheric interference observed by ground-based systems as well as the low-cost…
This paper presents simulations of the trajectories of high-energy ions through several bent crystal layers. At certain layer alignments volume reflection occurs from each layer and the resultant multiple volume reflection angle is…
The Sydney University Stellar Interferometer (SUSI) now incorporates a new beam combiner, called the Microarcsecond University of Sydney Companion Astrometry instrument (MUSCA), for the purpose of high precision differential astrometry of…
Bent crystal situated in a circulating beam can serve for efficient slow extraction or active collimation of the beams. This technique, well established at 10-1000 GeV, could be efficient also at the energies as low as 0.1-10 GeV according…
Several important and unique measurements, within the standard model and of possible physics beyond it, could be made with {\em polarized HERA} in which both the proton and the electron beams are polarized. With a $\sim$820 GeV proton beam…
The strong interactions programme of the NA61/SHINE experiment at the CERN SPS has been extended through the use of new silicon Vertex Detector, which allows for reconstructing open charm particles. The detector was designed to identify…
A cylindrical GEM tracker is under construction in order to replace and improve the inner tracking system of the BESIII experiment. Tests with planar chamber prototypes were carried out on the H4 beam line of SPS (CERN) with muons of 150…
A large-area and light-weight Gas Electron Multiplier (GEM) detector was built at the University of Virginia as a prototype for the detector R$\&$D program of the future Electron Ion Collider. The prototype has a trapezoidal geometry…
Integrated optics are used to achieve astronomical interferometry inside robust and compact materials, improving the instruments stability and sensitivity. In order to perform differential phase measurements at the H$\alpha$ line (656.3 nm)…
The Santa Cruz Extreme AO Lab (SEAL) is a new visible-wavelength testbed designed to advance the state of the art in wavefront control for high contrast imaging on large, segmented, ground-based telescopes. SEAL provides multiple options…
Observations at mas-resolution scales and high dynamic range hold a central place in achieving, for instance, the spectroscopic characterization of exo-Earths or the detailed mapping of their protoplanetary disc birthplace. Ground or…
The beam condition monitoring leakage (BCML) system is a beam monitoring device in the compact muon solenoid (CMS) experiment at the large hadron collider (LHC). As detectors 32 poly-crystalline (pCVD) diamond sensors are positioned in…
CUBES is a X-ray detector payload which will be installed on the KTH 3U CubeSat mission, MIST. The detector comprises cerium-doped Gd3Al2Ga3O12 (GAGG) scintillators read out with silicon photomultipliers through a Citiroc…