Related papers: Beam-based HOM Study in Third Harmonic SC Cavities…
Third harmonic cavities have been designed and fabricated by FNAL to be used at the FLASH/XFEL facility at DESY to minimise the energy spread along the bunches. Modes in these cavities are analysed and the sensitivity to frequency errors…
Transverse modes in the 3.9 GHz cavities, designed and fabricated by FNAL, are reported on. These modes have the potential to cause significant emittance dilution if they are not sufficiently suppressed. Recent probe-based-experiments have…
The third harmonic nine-cell cavity (3.9 GHz) for FLASH and the European XFEL has been investigated using simulations performed with the computer code CST Microwave Studio. The band structure of monopole, dipole, quadrupole and sextupole…
A new Higher Order Mode (HOM) damper was designed and tested for the Booster accelerator cavity at Fermilab. In anticipation of the PIP-II upgrade, it was discovered that the higher beam intensity of PIP-II may cause beam instability due to…
The interaction between a particle beam and the accelerating mode of a radiofrequency (RF) cavity cause beam loading, representing the beam-induced cavity fields. Beam loading leads to amplitude and phase errors in the cavity fields and…
Photonic crystal (PhC) defect cavities that support an accelerating mode tend to trap unwanted higher-order modes (HOMs) corresponding to zero-group-velocity PhC lattice modes at the top of the bandgap. The effect is explained quite…
Finite-bandwidth resonances of high-order axial modes (HOAM) in an open gyrotron cavity are studied numerically using the GYROSIM problem-oriented software package for modelling, simulation and computer-aided design (CAD) of gyrotron tubes.
Higher order mode (HOM) damping is a crucial issue for the next generation of high-current energy recovery linacs (ERLs). Beam-induced HOMs can store sufficient energy in the superconducting RF (SRF) cavities, giving rise to beam…
The Hong--Ou--Mandel (HOM) effect is often introduced through a single benchmark: coincidence suppression for \(\ket{1}\otimes\ket{1}\) at a balanced beam splitter. We present a classroom-oriented instructional module that broadens this…
At the Free-Electron Laser in Hamburg (FLASH) and the European X-Ray Free-Electron Laser, superconducting TeV-energy superconducting linear accelerator (TESLA)-type cavities are used for the acceleration of electron bunches, generating…
Precise calibration of the cavity phase signals is necessary for the operation of any particle accelerator. For many systems this requires human in the loop adjustments based on measurements of the beam parameters downstream. Some recent…
The utility of a passive fourth-harmonic cavity plays key role in suppressing longitudinal beam instabilities in the electron storage ring and lengthens the bunch by a factor of 2.6 for the phase II project of Hefei Light Source(HLS II).…
Human activity detection from digital videos presents many challenges to the computer vision and image processing communities. Recently, many methods have been developed to detect human activities with varying degree of success. Yet, the…
Experiments were performed at the Fermilab Accelerator Science and Technology (FAST) facility to elucidate the effects of long-range wakefields (LRWs) in TESLA-type superconducting rf cavities. In particular, we investigated the…
The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the…
There's presently a growing demand for cw high current proton and deuteron linear accelerators based on superconducting technology to better support various fields of science. Up to now, high order modes (HOMs) studies induced by ion beams…
The CMS Beam Conditions and Radiation Monitoring System, BRM, will support beam tuning, protect the CMS detector from adverse beam conditions, and measure the accumulated dose close to or inside all sub-detectors. It is composed of…
Multimode fibers (MMFs) support abundant spatial modes and involve rich spatiotemporal dynamics, yielding many promising applications. Here, we investigate the influences of the number and initial energy of high-order modes (HOMs) on the…
This article presents a method that uses turn-by-turn beam position data and k-modulation data to measure the calibration factors of beam position monitors in high energy accelerators. In this method, new algorithms have been developed to…
The classical problem of three-wave mixing in a nonlinear optical medium is investigated using the homotopy analysis method (HAM). We show that the power series basis builds a generic polynomial expression that can be used to study…