Related papers: An IR Photodetector Using an Optically Cooled Micr…
We consider a far infrared (terahertz), room-temperature detector based on a microcantilever sensor of the radiation pressure. This system has a significantly higher sensitivity than existing uncooled detectors in the far infrared…
An inertial sensor design is proposed in this paper to achieve high sensitivity and large dynamic range in the sub-Hz frequency regime. High acceleration sensitivity is obtained by combining optical cavity readout systems with…
It is shown that an optical parametric amplifier inside a cavity can considerably improve the cooling of the micromechanical mirror by radiation pressure. The micromechanical mirror can be cooled from room temperature 300 K to sub-Kelvin…
Cooling down nanomechanical force probes is a generic strategy to enhance their sensitivities through the concomitant reduction of their thermal noise and mechanical damping rates. However, heat conduction mechanisms become less efficient…
It is shown that under realistic background considerations, an improvement in Cold Dark Matter sensitivity of several orders of magnitude is expected from a detector based on superheated liquid droplets. Such devices are totally insensitive…
We explore the viability of using optical refrigeration as a low-vibration cooling method for a phase-sensitive optomechanical amplifier proposed to improve the sensitivity of future gravitational wave detectors. We find that with moderate…
Non-contact temperature sensors are widely used, often utilizing infrared light for temperature measurement. However, specific applications demand non-contact detection, particularly within closed containers containing fluids or gases,…
Uncooled InfraRed (IR) detectors have enabled the rapid growth of thermal imaging applications. These detectors are predominantly bolometers, where the heating of pixel from incoming IR radiation is read out as a resistance change. Another…
Optical interferometers with suspended mirrors are the archetype of all current audio-frequency gravitational-wave detectors. The radiation pressure interaction between the motion of the mirror and the circulating optical field in such…
We demonstrate millikelvin thermometry of laser cooled trapped ions with high-resolution imaging. This equilibrium approach is independent of the cooling dynamics and has lower systematic error than Doppler thermometry, with \pm5 mK…
We describe an experiment in which a mirror is cooled by the radiation pressure of light. A high-finesse optical cavity with a mirror coated on a mechanical resonator is used as an optomechanical sensor of the Brownian motion of the mirror.…
High-speed thermal imaging in the long-wave infrared (LWIR) is critical for applications from autonomous navigation to medical screening, yet existing uncooled detectors are fundamentally constrained. Resistive bolometers are limited by…
We have extended the range of the high-pressure optical spectroscopy to the far-infrared region keeping the accuracy of ambient-pressure experiments. The newly-developed method offers a powerful tool for the study of pressure-induced phase…
We experimentally demonstrate the high-sensitivity optical monitoring of a micro-mechanical resonator and its cooling by active control. Coating a low-loss mirror upon the resonator, we have built an optomechanical sensor based on a very…
The mid-infrared (MIR) spectral range, pertaining to important applications such as molecular 'fingerprint' imaging, remote sensing, free space telecommunication and optical radar, is of particular scientific interest and technological…
To measure low-temperature thermal fields, we have developed a single-element cooled thermal imaging camera for a spectral range of 8{\div}14 {\mu}m with an internal shutter for radiometric calibration. To improve the accuracy of measuring…
A high temperature superconducting detector was fabricated to capture the thermal images in room temperature background. The detector was made of YBa2Cu3O7-{\delta} (YBCO) superconducting thin film deposited on an Yttria Stabilized Zirconia…
In some experiments and applications there is need for large-area photosensitive detectors to operate at cryogenic temperatures. Nowadays, vacuum PMs are usually used for this purpose. We have developed special designs of planar…
We consider an optical probe that interacts with an ensemble of rare earth ions doping a materialin the shape of a cantilever. By optical spectral hole burning, the inhomogeneously broadenedtransition in the ions is prepared to transmit the…
In contrast to current efforts to quantify the radiation pressure of light using nano-micromechanical resonators in cryogenic conditions, we proposed and experimentally demonstrated the radiation pressure measurement in ambient conditions…