Related papers: Reverse depth profiling of electrodeposited Co/Cu …
In this work, the authors fabricated Cu2O porous nanostructured films (PNFs) on glass slide substrates by the newly developed positive bias deposition approach in a balanced magnetron sputtering (MS) system. It was found that the surface…
We report results of high-resolution TOF SIMS (time of flight secondary ion mass spectrometry) depth profiling experiments on a nanolayered structure, a stack of 16 alternating MgO and ZnO ~5.5 nm layers grown on a Si substrate by atomic…
A comparative study of the structural, optical and morphological properties of Cu2ZnSnS4 (CZTS) thin films prepared by two different techniques was performed. One consists of sequential evaporation of the elemental metallic precursors under…
We present a non-destructive, spatially resolved thickness characterization method for rhombohedral (3R) molybdenum disulfide (MoS$_2$) on polydimethylsiloxane (PDMS) substrates. Unlike broadband spectroscopic approaches, the proposed…
Scanning electron microscopy (SEM), a century-old technique, is today a ubiquitous method of imaging the surface of nanostructures. However, most SEM detectors simply count the number of secondary electrons from a material of interest, and…
Many spectral CT applications require accurate material decomposition. Existing material decomposition algorithms are often susceptible to significant noise magnification or, in the case of one-step model-based approaches, hampered by slow…
NbN films were deposited on SS substrates by reactive DC magnetron sputtering at various N2 flow rates and substrate biasing. Effect of N2 flow rate and substrate biasing has been studied on deposition rate, surface hardness,…
Room-temperature transport properties (the zero-field resistivity, \rho 0, and the GMR) were studied for ED Ni50Co50/Cu multilayers as a function of the individual layer thicknesses and total multilayer thickness. The Cu deposition…
Ni-doped Cd1-xMnxS (x=0.4) thin films were prepared via a cost-effective chemical bath deposition (CBD) method to investigate their suitability for optoelectronic applications. Incorporation of a secondary transition metal such as Ni is…
The study of thin films and 2D materials, including transition metal dichalcogenides such as WSe$_2$ offers opportunities to leverage their properties in advanced sensors, quantum technologies, and device to optimize functional performance.…
5$\mu$m thick SmCo films were deposited onto Si substrates using triode sputtering. A study of the influence of deposition temperature (Tdep <= 600 degrees C) on the structural, magnetic and mechanical properties has shown that optimum…
A none conventional approach for depth profiling of thin film systems with enhanced depth resolution has been developed using standard Auger microprobe instruments. For the preparation of an in situ low angle cross-section, the sample is…
The ZnO films, 25 nm thick were deposited by e-beam evaporation of ZnO (99.9%) pellets onto native oxide covered silicon (100) substrates. Details of the interface chemical composition and the chemical depth profile have been deduced as…
The experimental research on the nature of diffusion by the Mo substrate atoms into the Ti and Cr deposited thin films is completed by the secondary ion-ion emission method. In [1], the initial stage of the Ti thin film on the Mo substrate…
The profile of suspended silicon nitride thin films patterned with one-dimensional subwavelength grating structures is investigated using Atomic Force Microscopy. We first show that the results of the profilometry can be used as input to…
Superconducting microstrip resonators, which leverage kinetic inductance to probe electrodynamics, are sensitive tools for studying superconducting thin films at microwave frequencies. However, extracting the absolute superconducting…
The objective of this work was to study the RF sputtering process parameters optimisation for deposition of Silicon Nitride thin films. The process parameters chosen to be varied were deposition power, deposition duration, flow rate of…
This work presents a cost-effective alternative technology for the formation of nanostructured semiconductor materials for tunable light emitting devices. CdS and ZnS semiconducting colloid nanoparticles coated with organic shell,…
To design semiconductor-based optical devices, the optical properties of the used semiconductor materials must be precisely measured over a large band. Transmission spectroscopy stands out as an inexpensive and widely available method for…
Near surface silver nanoparticles embedded in silicon oxide were obtained by 40 keV silver negative ion implantation without the requirement of an annealing step. Ion beam induced local heating within the film leads to an exo-diffusion of…